9451/01 FG Syringe - 1pce.

€3.80*

Prices incl. VAT plus shipping costs

Available

Product number: fg_9451_01

EAN: 4058575006916

Product information "9451/01 FG Syringe - 1pce."

Spare part for .

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

9452/02 FG Filling and ventilation set

Genuine FG spare/option part. Spare part 9440.

€4.70*

9438/01 FG Pedestal for hydraulic brakes

Alloy pedestal to mount the master brake cylinder of the hydraulic brakes FG Magura 2, Mecatech Expert and Mecatech twin piston brake systems on the sloped chassis part of Off-Road Buggies and Monster models.Lieferumfang1x Pedestal for hydraulic brakes2x Countersunk screw with torx 4x12 2x Countersunk screw with torx 4x14

€14.40*

9439/38 FG Angle connector 45° for hydraulic brakes - 1 pce

Genuine FG spare/option part.Spare part for 9439.Contents:1 piece

€16.90*

9439/12, FG Brake line fitting, 90°, 1 pce.

Spare part for 9439

€13.90*

This product is no longer available.

9452 FG Hydraulic oil 50 ml

Genuine FG spare/option part. Spare part for 9440 and Hydraulic brakes.Contents:1 piece / 50 ml

Content: 50 Milliliter (€364.00* / 1000 Milliliter)

€18.20*

9439/30 FG Brake line clear 1 m

Original FG Ersatz-/Tuningteil.Measures:Outer diameter: 4 mmInner diameter: 2 mmContents:1 piece / 1 meter

€9.50*

9440/04 FG Screw M3x30mm for brake caliper, 4 pieces

Genuine FG spare/option part.Spare part for .Part is delivered in silver or black color from vendor!Content:4 pieces

€1.40*

9445 FG Brake disk - 2pcs.

Spare part for .Diameter 69 mm x thickness 1.5 mm

€45.90*

9440/31 Brake line black 1m - 1pce.

Spare part for .These parts are not more available from manufacturer, alternative you can convert complete to the 4mm lining system.To convert the lining of one brake/axle the following parts will be required:1x 4mm brake lining 1mT-connector 1x 90° angle connector3x More parts of this 4mm brake lining system you find here:

€6.90*

9449 FG Brake line cutter - 1pce.

Tool for .

€34.90*

9439/11 Torx cap head screw M3x30, 4 pieces

Genuine FG spare/option part.Spare part for 9439.Content:Four pieces

€2.10*

9439/17, FG Dowel pin, 2 pcs.

Spare part for 9439

€4.40*

Customers also viewed

y1426 HT aluminum gear carrier -on-road- with steel spur gear for the layshaft

Fits FG and Smartech touring cars. The use of steel spur gears on the layshaft increases reliability significantly. Pebbles, heat and shock loads created by high rev clutches are no longer a problem. The carrier is designed for reverse installation as seen on the FG EVO car, where the hubs of pinion and spur gear carrier are pointing to the outside of the car. The carrier features M8 grub screws for installation on the layshaft. This means that the tip of the screw is as wide as the flat area on the shaft and ensures best possible load distribution. The spur gears feature the same diameter as the FG plastic versions. The use of a steel clutch pinion is mandatory with steel spur gears! The spur gears are available as 39T, 40T or 41T versions. The following measures are required for installation of the HT-steel gear adapter "on-road" on the layshaft in FG EVO 2020 cars:- The installed wide 16T layshaft pinion 6431/01 must be replaced by the narrow version 6431.- The supplied 1mm shim must be added between layshaft pinion and ball bearing.- The flat sections on the layshaft do not have the usual 180° offset for the adapter; therefore only one grub screw will be used. However, since this is a wide face M8 version, this is no disadvantage.

€69.90*

Configure now

LOSA6942 Losi Ball Bearing 8x16 mm

Genuine Losi spare/option part. Contents:4 pieces

€9.99*

Details