Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

9439/35, FG valve

Product information "9439/35, FG valve"

Spare part for 9439

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

y1358 PTFE thread sealing tape, 12 mm wide, 10 m roll
Perfect for sealing threads.Resistant against almost all chemicals.Dimensions:Width: 12 mmThickness: 0.075 mmLength: 10 meters

€2.90*

Average rating of 0 out of 5 stars

y1018 GIANT GRIP tires complete set for Traxxas X-MAXX 4x4 with adapter
Offerset:2 Pairs MadMax Giant Grip tires2 Pairs MadMax rims2 Pairs MadMax inlays2 Pairs / 4 pieces adapter TT1020/01GIANT GRIP 190 x 70 with black colored MadMax Extreme rims, 20-fold screwed, very tough, with 24 mm hex drive and reinforced beadlock rings for Losi 5ive-T and Desert-Buggy XL as well as all HPI Baja 5 B/T cars.The GIANT GRIP provides giant traction through 96 about one cm² wide and 5 mm high strong lugs, getting ample grip even on loose surfaces like sand and soil.Due to the extreme strain caused by the GIANT GRIP tires the MadMax rim with reinforcement ring had to be optimized once more.The set consists of four tires, including tire inserts and MadMax EXTREME rims and 4 pieces adapter wheel nuts TT1020/01.The GIANT GRIP tires come with strong special tire inserts which allow to transfer the power without canting, even on heavy cars like the Losi 5ive-T.Dimensions:Outer diameter: 190 mmTire width at bead 70 mmTread width 80 mmReinforced 24 mm hex wheel driveThe video shows the 18 mm square drive version. Also available with 24 mm hex. Some off-road tires knowledge can be found here!TT1020 Top Tuning Adapter wheel nutGenuine TopTuning spare/option part.These adapter nuts, manufactured from billet 7075 aluminum allow for easy and precise installation of all MadMax, HPI and Losi tires and rims on the Traxxas X-Maxx. For the best result possible, nut and adapter are manufactured as a one-piece unit.It should be noted that the wide rims can be used on the rear axle only. On the front axle they would limit the steering angle by grinding on lower a-arm and steering rod.Traxxas has microencapsulated the wheel shafts of the X-Maxx to secure the wheel nuts. Like any thread locking compound this is not for eternity. After several tire changes the use of a normal screw locking compound is advised, we recommend it "y0113 / 01 medium strength".The dimensions of the nut are specifically designed for use with MadMax, current HPI and Losi rims. Rims from Losi 5ive have slightly different dimensions in the hub area. This is meaningless on the large LOSI or HPI wheel adapters. With the smaller and shorter wheel nut thread of the X-Maxx wheel shafts you cannot compromise. Therefore there are also special nuts for the Losi rims/wheels available at our options menu.However, somewhere in the past, the injection moulds for the HPI rims were slightly modified in the hub area. As part of that job the bore diameter has probably been slightly increased. Therefore, the use of older rims in combination with the adapter nuts makes it necessary to increase the rim bore a little bit.Due to repeated requests for use: these wheel nuts replace the stock wheel nuts when installing the wheels!Contents:4 pieces

€149.90*

Alternatives

Average rating of 0 out of 5 stars

y1018 GIANT GRIP tires complete set for Traxxas X-MAXX 4x4 with adapter
Offerset:2 Pairs MadMax Giant Grip tires2 Pairs MadMax rims2 Pairs MadMax inlays2 Pairs / 4 pieces adapter TT1020/01GIANT GRIP 190 x 70 with black colored MadMax Extreme rims, 20-fold screwed, very tough, with 24 mm hex drive and reinforced beadlock rings for Losi 5ive-T and Desert-Buggy XL as well as all HPI Baja 5 B/T cars.The GIANT GRIP provides giant traction through 96 about one cm² wide and 5 mm high strong lugs, getting ample grip even on loose surfaces like sand and soil.Due to the extreme strain caused by the GIANT GRIP tires the MadMax rim with reinforcement ring had to be optimized once more.The set consists of four tires, including tire inserts and MadMax EXTREME rims and 4 pieces adapter wheel nuts TT1020/01.The GIANT GRIP tires come with strong special tire inserts which allow to transfer the power without canting, even on heavy cars like the Losi 5ive-T.Dimensions:Outer diameter: 190 mmTire width at bead 70 mmTread width 80 mmReinforced 24 mm hex wheel driveThe video shows the 18 mm square drive version. Also available with 24 mm hex. Some off-road tires knowledge can be found here!TT1020 Top Tuning Adapter wheel nutGenuine TopTuning spare/option part.These adapter nuts, manufactured from billet 7075 aluminum allow for easy and precise installation of all MadMax, HPI and Losi tires and rims on the Traxxas X-Maxx. For the best result possible, nut and adapter are manufactured as a one-piece unit.It should be noted that the wide rims can be used on the rear axle only. On the front axle they would limit the steering angle by grinding on lower a-arm and steering rod.Traxxas has microencapsulated the wheel shafts of the X-Maxx to secure the wheel nuts. Like any thread locking compound this is not for eternity. After several tire changes the use of a normal screw locking compound is advised, we recommend it "y0113 / 01 medium strength".The dimensions of the nut are specifically designed for use with MadMax, current HPI and Losi rims. Rims from Losi 5ive have slightly different dimensions in the hub area. This is meaningless on the large LOSI or HPI wheel adapters. With the smaller and shorter wheel nut thread of the X-Maxx wheel shafts you cannot compromise. Therefore there are also special nuts for the Losi rims/wheels available at our options menu.However, somewhere in the past, the injection moulds for the HPI rims were slightly modified in the hub area. As part of that job the bore diameter has probably been slightly increased. Therefore, the use of older rims in combination with the adapter nuts makes it necessary to increase the rim bore a little bit.Due to repeated requests for use: these wheel nuts replace the stock wheel nuts when installing the wheels!Contents:4 pieces

€149.90*

Average rating of 0 out of 5 stars

y1358 PTFE thread sealing tape, 12 mm wide, 10 m roll
Perfect for sealing threads.Resistant against almost all chemicals.Dimensions:Width: 12 mmThickness: 0.075 mmLength: 10 meters

€2.90*

Similar products

Average rating of 0 out of 5 stars

9452/02 FG Filling and ventilation set
Genuine FG spare/option part. Spare part 9440.

€4.70*

Average rating of 0 out of 5 stars

9439/38 FG Angle connector 45° for hydraulic brakes - 1 pce
Genuine FG spare/option part.Spare part for 9439.Contents:1 piece

€16.90*

Average rating of 0 out of 5 stars

9438/01 FG Pedestal for hydraulic brakes
Alloy pedestal to mount the master brake cylinder of the hydraulic brakes FG Magura 2, Mecatech Expert and Mecatech twin piston brake systems on the sloped chassis part of Off-Road Buggies and Monster models.Lieferumfang1x Pedestal for hydraulic brakes2x Countersunk screw with torx 4x12 2x Countersunk screw with torx 4x14

€14.40*

Average rating of 0 out of 5 stars

9439/12, FG Brake line fitting, 90°, 1 pce.
Spare part for 9439

€13.90*

Average rating of 0 out of 5 stars

9439/30 FG Brake line clear 1 m
Original FG Ersatz-/Tuningteil.Measures:Outer diameter: 4 mmInner diameter: 2 mmContents:1 piece / 1 meter

€9.50*

Average rating of 0 out of 5 stars

9445 FG Brake disk - 2pcs.
Spare part for .Diameter 69 mm x thickness 1.5 mm

€45.90*

Average rating of 0 out of 5 stars

9452 FG Hydraulic oil 50 ml
Genuine FG spare/option part. Spare part for 9440 and Hydraulic brakes.Contents:1 piece / 50 ml

Content: 50 Milliliter (€364.00* / 1000 Milliliter)

€18.20*

Average rating of 0 out of 5 stars

9440/04 FG Screw M3x30mm for brake caliper, 4 pieces
Genuine FG spare/option part.Spare part for .Part is delivered in silver or black color from vendor!Content:4 pieces

€1.40*

Average rating of 0 out of 5 stars

9440/31 Brake line black 1m - 1pce.
Spare part for .These parts are not more available from manufacturer, alternative you can convert complete to the 4mm lining system.To convert the lining of one brake/axle the following parts will be required:1x 4mm brake lining 1mT-connector 1x 90° angle connector3x More parts of this 4mm brake lining system you find here:

€6.90*

Average rating of 0 out of 5 stars

9449 FG Brake line cutter - 1pce.
Tool for .

€34.90*

Average rating of 0 out of 5 stars

9445/06 Epoxy brake disk for hydraulic brake - 2pcs.
Low weight, temperature stability and a very good dosable progressive brake performance distinguish these carbon fiber brake disks. Suitable for all FG models with hydraulic brake system. Only useable in connection with the steel brake lining .replacement: 9445/5

€33.90*

Average rating of 0 out of 5 stars

9439/11 Torx cap head screw M3x30, 4 pieces
Genuine FG spare/option part.Spare part for 9439.Content:Four pieces

€2.10*

Customers also viewed

Average rating of 0 out of 5 stars

9439/06 FG Brake pads
Spare part for 9439.Contents:4 pieces

€31.90*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Agency