9020/01 FG Front bumper for CLK-GTR

€27.50*

Prices incl. VAT plus shipping costs

Available

Product number: fg_9020_01

EAN: 3410569701732

Product information "9020/01 FG Front bumper for CLK-GTR"

Genuine FG spare/option part.

Passend für CLK-GTR.
Length 120 mm
Width 405 mm

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

8600/13 FG Shim 8x17x0,5 mm

Genuine FG spare/option part.Spare part for FG 8603.Part is delivered in silver or black color from vendor!Contents:4 piece

€5.70*

8610/10, FG Front axle w/h collar/ Square wheel driver 14 mm, set

Suitable for all FG front uprights. The use of this front axle prevents a pressing and jamming of the inner ball bearing rings when tightening the wheel. Suitable for square wheel driver 9,5mm and 14mm.

€23.00*

9014 FG Body mounts

Genuine FG spare/option part. Contents:2 piece

€15.10*

9014/01 Body mounts for CLK-GTR - 2pcs.

All measures in millimeters.

€15.10*

8939 FG Drift Tyres

Genuine FG spare/option part. Wheels with plastic treads for drifting.Dimension:Width: 65 mmDiameter: 110 mmContents:2 pieces

€118.95*

8600/11 FG O-Rings

Genuine FG spare/option part. Contents:1 set

€4.70*

Details

8600/06 FG Shaft seal 8x12x3mm - 2pcs.

Spare part for .

€13.90*

8602/01 FG Needle bearing 8x12x8mm - 2pcs.

Replacement bearing for visco differential. This bearing is narrower than the bearings in the other alloy diff cases.

€10.90*

8610/02 FG Square wheel driver 14mm f. 08610/01, 2pcs.

Item N° 08610/02 Square wheel driver 14mm f. 08610/01, 2pcs.Suitable for all FG front uprights with FG No. 8610/01 Front axle with collar, 1pce.

€13.90*

8600/02 FG Alloy case B for visc. differential - 1pce.

Spare part for .

€38.90*

8600/10 FG Drain screw M8x1 mm, 1 piece

Spare part for .Part is delivered in silver or black color from vendor!

€3.90*

8602/03, FG Steel flanged sleeve 8x12/ 16x5, 2 pcs.

Hardened and therefore highly wear resistant steel flanged sleeves for the viscous locking differential. Replace the bronze bushings 8602/2.

€6.50*

Customers also viewed

7020/12 FG Front bumper for Audi A4 and BMW ALMS

Genuine FG spare/option part. Fits Audi A4 and BMW ALMS body shell.Not suitable for BMW M3 ALMS Superstar.Dimensions:Length: 107 mmWidth: 387 mmContents:1 piece

€29.90*

FG Sportsline 2WD-530 with Team Truck body and HT-Edition

Former: "Atego" Truck.The Sportsline 08 quality at a reasonable price for beginners. The Sportsline series is ideal for car modellers whose main focus is not just the chassis, but rather the combination of chassis and body shell.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Technical description:The models are built on a 4mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in. Further equipment points are front disk brakes, differential gear, easy-running FG ball drive, alloy brake calliper with big brake disk, stabilizer bar front and rear, tuned pipe muffler, Evo gas tank, rear brace, 20T steel pinion, spark plug cap suppression cover, latest version (Evo) oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings. The models are equipped with a powerful 23 cm³ combustion engine. The engine needs a 2-stroke petrol oil mixture. One tank filling gives you about 45 minutes driving fun. The power is transmitted over the well-tried system: from the engine over the 2-block clutch over radial tooth wheels on to the rear axle which is equipped with the bevel differential gear with pluggable axles. RC-plate with receiver box.HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount bigCNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant. They come with all necessary hardware included. Value: 64,95 EUR Alloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EUR Ball bearing set, sealed, set of 14The seal rings on sealed ball bearings keep dirt and dust out of the bearings. They are therefore particularly suitable for use in dirty and dusty environments.Value: 59,90 EURTotal value: 227,35 EURDimensions:Length: 880 mmWidth: 435 mmHeight: 380 mmWheelbase: 530 mmTrucks in action!

€1,349.95*

Configure now

3025 FG Front bumper for Street/Team-Truck

Genuine FG spare/option part. Contents:1 piece

€48.95*

6033/02 FG Body Support

Genuine FG spare/option part. Body mount for the Beetle 4WD.Unit:1 pieces

€11.50*