Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

8600/06 FG Shaft seal 8x12x3mm - 2pcs.

Product information "8600/06 FG Shaft seal 8x12x3mm - 2pcs."

Spare part for .

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

8600/10 FG Drain screw M8x1 mm, 1 piece
Spare part for .Part is delivered in silver or black color from vendor!

€3.90*

Average rating of 0 out of 5 stars

8600/13 FG Shim 8x17x0,5 mm
Genuine FG spare/option part.Spare part for FG 8603.Part is delivered in silver or black color from vendor!Contents:4 piece

€5.90*

Average rating of 0 out of 5 stars

8600/11 FG O-Rings
Genuine FG spare/option part. Contents:1 set

€4.90*

Average rating of 0 out of 5 stars

8383 FG Fuel tank 800ml with quick acting closure, 1 pce.
Item N° 08383 Fuel tank 800ml with quick acting closure, 1 pce.800 ml fuel tank with snap closure, ventilating valve, fuel filter and fuel hoses.Dimensions:Lenght: 130 mmWidth: 100 mmHeight: 100 mmVolume: 800 ml

€79.95*

Average rating of 0 out of 5 stars

y1474 Aluminum foil tape, self-adhesive, 50 mm x 45 meters
Genuine HT spare/option part.50 mm wide, self-adhesive aluminum foil tape, especially for heat insulation; i.e. between tuned pipe and plastic or electronic components.Content:1 piece / 45 meters

€9.90*

Average rating of 0 out of 5 stars

9452/02 FG Filling and ventilation set
Genuine FG spare/option part. Spare part 9440.

€4.90*

Similar products

Average rating of 0 out of 5 stars

8600/13 FG Shim 8x17x0,5 mm
Genuine FG spare/option part.Spare part for FG 8603.Part is delivered in silver or black color from vendor!Contents:4 piece

€5.90*

Average rating of 0 out of 5 stars

9014 FG Body mounts
Genuine FG spare/option part. Contents:2 piece

€17.90*

Average rating of 0 out of 5 stars

9014/01 Body mounts for CLK-GTR - 2pcs.
All measures in millimeters.

€17.90*

Average rating of 0 out of 5 stars

8610/10, FG Front axle w/h collar/ Square wheel driver 14 mm, set
Suitable for all FG front uprights. The use of this front axle prevents a pressing and jamming of the inner ball bearing rings when tightening the wheel. Suitable for square wheel driver 9,5mm and 14mm.

€29.90*

Average rating of 0 out of 5 stars

8939 FG Drift Tyres
Genuine FG spare/option part. Wheels with plastic treads for drifting.Dimension:Width: 65 mmDiameter: 110 mmContents:2 pieces

€111.95*

Average rating of 0 out of 5 stars

8600/11 FG O-Rings
Genuine FG spare/option part. Contents:1 set

€4.90*

Average rating of 0 out of 5 stars

8600/10 FG Drain screw M8x1 mm, 1 piece
Spare part for .Part is delivered in silver or black color from vendor!

€3.90*

Average rating of 0 out of 5 stars

8602/01 FG Needle bearing 8x12x8mm - 2pcs.
Replacement bearing for visco differential. This bearing is narrower than the bearings in the other alloy diff cases.

€5.90*

Average rating of 0 out of 5 stars

8610/01 FG Front axle with collar, 1pce.
Item N° 08610/01 Front axle with collar, 1pce.Suitable for all FG front uprights. Suitable for square wheel driver 9,5mm and 14mm. Dimensions: Shaft: 8 mm Outside thread: M6 Inside thread: M4 Total length: 58 mm

€11.50*

Average rating of 0 out of 5 stars

8610/02 FG Square wheel driver 14mm f. 08610/01, 2pcs.
Item N° 08610/02 Square wheel driver 14mm f. 08610/01, 2pcs.Suitable for all FG front uprights with FG No. 8610/01 Front axle with collar, 1pce.

€14.90*

Average rating of 0 out of 5 stars

8602/03, FG Steel flanged sleeve 8x12/ 16x5, 2 pcs.
Hardened and therefore highly wear resistant steel flanged sleeves for the viscous locking differential. Replace the bronze bushings 8602/2.

€6.50*

Average rating of 0 out of 5 stars

8600/02 FG Alloy case B for visc. differential - 1pce.
Spare part for .

€34.99*

Customers also viewed

Average rating of 0 out of 5 stars

2015-11 Mecatech Shaft seal

€16.00*

Average rating of 0 out of 5 stars

ST-AN26V SPEED TEC 0,25/0.50 mm carburetor AN - expansion sealing gasket
st_an26v Thickness: ST-AN26V/025 - 0,25 mm
Genuine Speed-Tec spare/option part. For Zenoah G230/G240/G260/G270/G290/G320AN - expansion sealing gaskets are in use in the 2-stroke motor sports for years and are based on NBR-linked cellulose fibers. They are especially used for sealing hot oils, greases and fuels! The sealing material is compressed during assembly, and as soon as it comes into contact with fuel, it swells again. Thus it is i.e. possible to make up for irregularities in the sealed surfaces (i.e. cylinder / crankcase) and seal them properly! The material of the SPEED TEC AN - expansion sealing gaskets guarantees a very good dimensional accuracy and is often the solution for leaks on your engine! Technical data of the material in contact with fuel:- Rebound ASTM G > 30%; increase in thickness < 5%; weight gain < 55%;- Compressibility ASTM F36 G 22.5% +/- 2.5 27.5% +/- 7.5 The SPEED TEC AN - expansion sealing gaskets are available in the following versions:# ST-AN26V carburetor gasket 0,25/0,50 mm# ST-AN25I insulator gasket 0,25/0,50 mm# ST-AN24L air filter gasket 0,25/0,50 mm# ST-AN22 cylinder gasket, two bolt 0,25/0,50 mm# ST-AN42 cylinder gasket, four bolt 0,25/0,50 mm# ST-AN23G crank case gasket 0,25/0,50 mmContents:1 piece

€4.40*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Agency