8412/03 FG Clutch block for adjustable clutch - 1pce.

€23.60*

Prices incl. VAT plus shipping costs

Available

Product number: fg_8412_03

EAN: 4058575005841

Product information "8412/03 FG Clutch block for adjustable clutch - 1pce."

Spare part for .

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Similar products

8418/06 FG Foam part for 8418 - 1 pce.

Spare part for .Length: 107 mmWidth: 410 mmHeight: 50 mm

€21.90*

8418 FG Foam front bumper 1:5 - set

Item N° 8418 Foam front bumper 1:5 - setThe foam of this bumper set can be easily removed upwards through dismounting the body clips. Suitable for all 1:5 models. The foam can be adapted to all front bodies through cutting.Length: 110 mmWidth: 410 mmHeight: 55 mm

€44.50*

8381/01 FG 90° connection

Genuine FG spare/option part.Suitable for fuel hoses with an inner diameter of 3-4 mm. Necessary for the fuel supply and tank ventilation.Contents:2 pieces

€7.30*

8381 FG Fuel hose black 1,5 m

Genuine FG spare/option part. Black fuel hose 3x6 mm also suitable for the tank ventilation. Softness approx. 60 shore. Suitable for all big scale models.

Content: 150 Zentimeter (€21.27* / 100 Zentimeter)

€31.90*

8380/06 FG Tank gasket

Genuine FG spare/option part.Spare part for order no: 8380.Contents:1 set

€4.90*

8384 FG Fuel tank 700ml with quick acting closure

Genuine FG spare/option part. 700 ml fuel tank with snap closure, ventilating valve, fuel filter and fuel hoses.Dimensions:Length: 152 mmWidth: 102 mmHeight: 70 mm and with fuel cap 95 mmContents:1 piece

€91.90*

This product is currently not available.

8384/01 FG Tank 700ml

Item N° 8384/01 Tank 700mlSpare part for FG fuel tank no. 8384.Contents:1 piece

€49.95*

8381/05 FG Tank venting valve, 1pce.

Item N° 08381/05 Tank venting valve, 1pce.Small handy vent valve for the fuel tank ventilation. Replaces the previously used vent hoses.

€11.90*

8383 FG Fuel tank 800ml with quick acting closure, 1 pce.

Item N° 08383 Fuel tank 800ml with quick acting closure, 1 pce.800 ml fuel tank with snap closure, ventilating valve, fuel filter and fuel hoses.Dimensions:Lenght: 130 mmWidth: 100 mmHeight: 100 mmVolume: 800 ml

€84.70*

8380/04 FG Torsion spring for tank cap - 1pce.

Spare part for .

€5.70*

8380/07 FG Safety ring

Genuine FG spare/option part.Spare part for FG .For 7 mm shaft diameter.Contents:2 pieces

€2.60*

8412/05 FG Bearing bush - 2pcs.

Spare part for .

€13.00*

Customers also viewed

903184, Clutch set

Complete clutch with spring, carrier and bolts.Please note:The usual spare parts supply is not yet available for these engines. Therefore the parts may come from disassembled new engines. Since every single engine is tested at the factory, the parts may show some minor signs of "use".

€27.70*

Gas-nitrited tuning clutch bell for all cars to choose

For Model: y0726 - for all Losi 5ive-T

Different versions to choose:y0723 Gas-nitrited tuning clutch bell for FG, Smartech / Carson, Harm, RS5 & Co..Gas-nitrited tuning clutch bell; machined from high grade steel with vents for cooling of the clutch system and holes for easy clutch adjustment. The clutch bell features a significantly reinforced wearing surface which guarantees dimensional stability even under high loads!For best mounting of the pinion the clutch bell shaft has to flats with a 90° offset. As an additional safety device a M5 bolt with washer (included) replaces the E-clip found on stock clutch bells.Suitable for many 1/5 and 1/6 cars, such as all FG (except Formula 1), Carson a.s.o.y0726 Gas-nitrited tuning clutch bell for Losi 5ive-TGas-nitrited tuning clutch bell machined from high grade steel with a hole for easy clutch adjustment. Special vents remove dirt and clutch lining debris automatically, preventing it from accumulating in the clutch bell and causing premature wear to clutch bell and linings. They aid in cooling of the clutch bell as well.The clutch bell features a significantly reinforced wearing surface and face which guarantees dimensional stability even under high loads! The shaft is a tiny bit longer than stock (about 0.2 mm) to prevent the bearings from binding.Since this clutch bell is single-piece machined from bar stock there is no weld bead on the inside of the face plate. The gained space allows now to use the adjustable GPM Big Scale-Cross clutch.Suitable for genuine slot drive Losi pinions. Comes with bolts and spring washers included.y0726/01 Gas-nitrited tuning clutch bell for Losi DBXLGas-nitrited tuning clutch bell with black oxide coating, machined from high grade. Special vents remove dirt and clutch lining debris automatically, preventing it from accumulating in the clutch bell and causing premature wear to clutch bell and linings. They aid in cooling of the clutch bell as well. This clutch bell is dimensionally identical to the stock part. Heat treatment and the use of a high grade material guarantee long service life.Due to a special heat treatment the clutch bell surface is shaded; this does not effect the function, but ensures great durability.y0729 Gas-nitrited tuning clutch bell for HPI Baja models, 1 pce.Gas-nitrited tuning clutch bell machined from high grade steel with a hole for easy clutch adjustment. Special vents remove dirt and clutch lining debris automatically, preventing it from accumulating in the clutch bell and causing premature wear to clutch bell and linings. They aid in cooling of the clutch bell as well.The clutch bell features a significantly reinforced wearing surface whichguarantees dimensional stability even under high loads!Since this clutch bell is single-piece machined from bar stock there is no weld bead on the inside of the face plate. The gained space allows now to use the adjustable GPM Big Scale-Cross clutch.Suitable for slot drive HPI Baja pinions, both stock using a 4mm bolt and aftermarket ones for 5mm bolts. Comes with M4 and M5 bolts included.

€39.90* €49.90* (20.04% saved)