8076 FG Body main part Alfa Romeo 156 WTCC 1,5mm - 1 pce.

€149.50*

Prices incl. VAT plus shipping costs

Available

Product number: fg_8076

EAN: 3410564519547

Product information "8076 FG Body main part Alfa Romeo 156 WTCC 1,5mm - 1 pce."

Spare part for FG 8075/01.

EFRA number: 5053/06.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

8064 FG Roll cage set for BMW E30

Genuine FG spare/option part. Suitable for BMW E30.For the assembly the mounts FG no. 5013 and 8013 are required.Contents:1 set

€59.00*

8092 FG Shock fastening pin/set collar

Item N° 8092 Shock fastening pin/set collar.Black-finished steel pin. Fits for older Sportsline models, 4 mm diameter x 56 mm long.Comes with two 4 mm set collars, 8 mm outer diameter x 5 mm wide.

€5.50*

8042/01 FG Rear wing support 2WD/4WD, 530, 1/5

Genuine FG spare/option part.Keeps the rear wing from bending downwards under high downforce.Contents:1 setFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€18.90*

8042 FG Rear wing support 1:5

Genuine FG spare/option part. Keeps the rear wing from bending downwards under high downforce.Contents:1 piece

€18.90*

8063/01 FG BMW M3 E30 Team decals

Genuine FG spare/option part. Contents:1 piece

€49.90*

8059 FG Body set BMW M3 E30, clear 2 mm

Genuine FG spare/option part. The body set contents the main part, front body and the rear wing. The body is clear.Required body mounts:Mount front: FG 7020/06 Front bumperRear body mount: FG 7152/01 Rear body mountSide body mount front: FG 3014 Body mountsSide body mount rear: FG 3014 Body mountsDimensions:Length: 870 mmWidth: 392 mmHeight: 260 mmWheelbase: 510 mmContents:1 piecePainting tips:

€244.95*

8077 FG Front body Alfa Romeo 156 WTCC - 1 pcs

Spare part for 8075 and 8075/01Painting tips:

€49.95*

8025/01 FG Alloy roll cage D for Calibra - 2 pcs.

Suitable for Opel Calibra.Measures:Inside: 8,2 mmOutside: 10 mmLength: 200 mm

€16.00*

8024/02 FG Alloy roll cage C for Calibra - 2 pcs.

Suitable for Opel Calibra.Measures:Inside: 8,2 mmOutside: 10 mmLength: 150 mm

€14.40*

8073 FG Body set Alfa Romeo 156 WTCC, 1 mm clear

Genuine FG spare/option part.The body kit is supplied without rear spoiler! Required body mounts:Mount front: FG 7020/10 Front bumper Rear body mount: FG 7152/01 Rear body mount Side body mount front: FG 8013 Body mounts Side body mount rear: FG 7014 Body mounts Measures:Length: 900 mmWidth: 400 mmHeight: 245 mmWheelbase: 535 mmContents:1 piecePainting tips:

€179.50*

8061 FG Body shell BMW M3 E30 front part

Genuine FG spare/option part. Contents:1 piecePainting tips:

€98.95*

8093 FG Brake cable bracket - 1pce.

Spare part for , , , , and .

€5.50*

Customers also viewed

4150 FG Audi A4 DTM body shell main section, 2 mm

Genuine FG spare/option part.Unpainted spare part.Contents:1 piecePainting tips:

€158.50*

2012-61 Mecatech Plastic Bush for Wishbones

Genuine Mecatech spare/option part for the FW01.Content:8 pieces

€18.00*

Details

2012-110 Mecatech Bearing for Main Shaft

Genuine Mecatech spare/option part for the FW01.Low-friction Bearing for main shaft ABEC-7, sealed on booth sides.Content:1 piece

€9.20*

y0580 Mammoth Supergrip for 1/6 and 1/5 offroad cars glued

If you want a special combination of compounds please enter that information into the "note to us" form field at the end of the checkout process.Mammoth Supergrip for 1/6 and 1/5 offroad cars. Fits too for Formular 1 models!Parking lot / race tires for your offroad car.VersionWidthOuter diameterFront64 mm153 mmRear78 mm153 mmGlued on genuine FG rims (rear tires using extension rings), with foam rubber inserts included. Rim has 18 mm square drive with reinforcement ring.Please note: based on experience we recommend against using other manufacturers rims and extensions. Since the Mammoth tires provide very good grip the rim and the bonding must withstand high loads. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.The Mammoth Supergrip is available in in the following compounds: Super softSoftMediumHardFront tirey0581y0582y0583y0584Rear tirey0591y0592y0593y0594General recommendation:The dirtier the track or the lower the ambient temperatures, the stickier (softer) the rear tires should be.Hint regarding the front tires: 2WD cars should use them one or two grades harder then the rears. 4WD cars usually like the same compound all around.Of course, the softer the tire the higher the wear rate; and this applies to Mammoth Supergrip onroad tires as well.The tires have a special onroad thread pattern but will still provide ideal traction after the pattern has been worn out. The white lettering on the tires has been applied for presentation purpose only. The tires will be delivered with black sidewall.Prices per unit: FrontRearMammoth Supergrip:Pair44,90 EUR49,90 EURTire inserts:Pair13,00 EUR13,00 EURFG rim:Pair14,90 EUR14,90 EURFG extension ring:Pair--.-- EUR14,90 EURMounting:Pair13,00 EUR13,00 EURTotal Price 85,80 EUR 105,70 EUR = 191,50 EUR SETTotal for 1 pair each front and rear: 169,90 EUR================================Also suitable for:With the following wheel adapter: y1183 Rim adapter

€119.90*

FG Sportsline 2WD-530 Electric BMW M4 up to 200A/8S

The FG Touring and Sports cars at scale 1:5 are known for their high quality and very detailed bodyshells true to original. Also the technically fully developed chassis are worth mentioning. These models are now available with a high-torque brushless engine. Surface conditions with maximum grip assumed speeds above 100 km/h can be reached and steered controlled.The E stands for electric power and means extremely high torque, high top speed and all without motor noise. The Sportsline models are equipped with a powerful brushless motor and a brushless speed controller. The controller can be easily adjusted via the transmitter or optionally via a programming card or, depending on the equipment, via a mobile phone app.The unpainted version does not include a decal sheet! T2M standard equipment brushless motor and ESC: - ESC 150A controller 6S - Brushless motor 6SYou can order a motor/ESC combination with 8S for an additional charge.- ESC 200A, 3-8S LiPo, BEC 8A - Brushless Motor 8SYou can select the car with complete RTR-equipment from the options menu. RTR equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. All E-Power versions need for the final assembling LiPo batteries and the suitable charger. For an unproblematic mounting we recommend to use LiPo batteries with a max. length 150mm and a width of 50mm. The model is delivered with an EC8 connector system.

From €1,099.95*

Configure now