7098 FG Front axle trestle - 1pce.

€7.80*

Prices incl. VAT plus shipping costs

Available

Product number: fg_7098

EAN: 3410569694126

Product information "7098 FG Front axle trestle - 1pce."

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

7154 FG Body mount adjustable, 1 pce.

Adjustable body mount with heigt-adjustable body support.Measures:Length 110 mmDiameter 8 mm10 mm at the baseFor all cars and body shells.

€9.95*

7155 FG Body mount short adjustable

Genuine FG spare/option part. Adjustable body mount with heigt-adjustable body support.Dimensions:Length: 55 mmDiameter: 8 mmThe Base: 10 mmFor all cars and body shells.Contents:1 piece

€9.95*

7152/01 FG Extended rear mount

Genuine FG spare/option part. Fits all touring cars and Porsche 530.( Not for Mini Cooper und Porsche 465/510.)Contents:1 piece

€19.90*

Details

7152/02 FG Body mount front - 2pcs.

Total length: 60mmLength until body support: approx. 50mm

€8.50*

This product is currently not available.

7093 FG Silicone o-ring - 12pcs.

Inner diameter 4 mmThickness 2 mm

€6.90*

7143 FG/Carson/Smartech Tank mounting for Zenoah tank - 2pcs.

Suitable for .

€23.90*

7100 FG Adjusting clip for 16 mm axle, 16 pcs.

These adjusting clips allow a faster adjustment of the wishbones. Suitable for front and rear suspension. The set contains 16 adjusting clips in 2 and 6mm size for 6 mm axles.

€9.50*

Details

7102 FG Front wishbone pin - 2pcs.

6 x 87 mm

€9.90*

Details

7154/01 FG Body mount adjustable 80mm

Genuine FG spare/option part.Adjustable body mount with heigt-adjustable body support.Fits RC-models and bodies.Contents:1 set

€9.95*

7106 FG ATS rim silver 65mm - 2pcs.

Suitable for all FG 1:5 models and other makes.Rim with 18 mm square driveRim width: 65mmRim diamter: 95mmColour: Silver

€20.70*

7103/08 FG Distance bush for front upright

Genuine FG spare/option part.The installation of these spacer bushings between the ball bearings in the uprights allows you to tighten the wheel nut strongly. Suitable for all FG plastic and alloy uprights.Dimensions:Outer diameter: 11 mmWidth: 7 mmInner diameter 8,22 mmContents:2 pieces

€3.90*

7153 FG Extended rear body mount distance - 3pcs.

Distance rod for .Diameter 9.5 mmLength 75 mm

€13.90*

Customers also viewed

6098 FG Front bulkhead B

Genuine FG spare/option part. Suitable for all 1:6 models except Race-Trucks as well as LeopardContents:1 piece

€13.50*

y1209 HT Aluminum front bulkhead A for Carson/Smartech, Reely and FG

Genuine HT spare/option part.With provision to mount a stabilizer bar and replaceable bushings for the hinge pins.Fits Comanche, Attack Evo, CRT 2WD, CPT, C5, R5, FG Sportsline and Smartech Contents:1 piece

€49.90*

7101 FG Front axle support - 1pce.

Riser plate for the front end of 1/5 touring cars and race trucks with plastic front suspension.Raises the front bulkhead 13 mm over the rear one.

€8.90*

Front alloy bulkheads Eco

va_0013 Version: y19203 Eco front unit

Front bulkhead A for 1/5, replaces FG 7098, improves rigidity of the front suspension.For Eco-front axle.Select options: Eco front unit, y19203Eco rear unit, y19203-1

€31.50*

FG Challenge Line 2WD-510 Mini Cooper with 26 cm³ FG engine

With this robust and reliable FG chassis, which is equipped with a powerful 26 cm³ combustion engine, you get the ideal entry into the fascinating "royal class" of large scale RC models as well as into the competition.The model has a 510 wheelbase. The models are built on a 4 mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in.Further equipment points are differential gear, 24 teeth steel pinion, oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings.The remote control, the two servos and the receiver battery (RTR set!) are required to operate the FG model. This RTR equipment is available in our shop selection for an additional fee.The body shell is clear, but also available in a painted version in our shop selection for an additional fee.Thanks to the numerous available option parts, you can upgrade your FG Challenge Line as required.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 870 mmWidth: 392 mmHeight: 260 mmWheelbase: 510 mm

From €849.90*

Configure now

6496/02 FG Alloy front bulkhead 2WD B - 1pce.

CNC-manufactured front axle mount B in alloy. Suitable for 2WD Marder, Marder Race, Beetle On-/Off-Road and Monster models.

€28.50*

6000c/2023 FG Marder Vintage-Classic with 26 ccm engine RTR

With complete RTR equipment y1382 Original Maxi-Pin 1/6 offroad competition tire The legendary 1/6 FG Marder 2WD Off Road Buggy! For many years the ideal entry into the elite class of radio controlled cars! The large-scale car with tough 26 cc engine is operated with normal 2-stroke gas. A 800 cc tank gives almost an hour of driving fun! For the FG Marder theres a wealth of option parts, most of them are not exactly a must, but make infinitely more fun! The FG Marder comes with completely installed remote control. Just fuel up, start the engine and drive off.Features:The model is built on an angled 4 mm chassis plate. All screws on the bottom are countersunk with no protruding heads. Double a-arms front and rear axle with 4 high volume oil-filled shock absorbers ensure optimum traction.All rotating parts are supported by ball bearings. Secondary spur gears, bevel gears inside the differential and all drivetrain parts are case-hardened. Rocker panels protect the car against contamination from below. The model is equipped with a powerful 26 cc engine. It needs a regular 2-stroke petrol/oil mix (available at every gas station). The integrated pull starter allows for easy engine starts without additional equipment.Dimensions: Length: 690 mm Width: 420 mm Height: 270 mm Wheelbase: 475 mm

€849.90* €969.95* (12.38% saved)