7096/05 FG Stabilizer bar, front

€20.80*

Available

Product number: fg_7096_05

EAN: 3410569694102

Product information "7096/05 FG Stabilizer bar, front"

Genuine FG spare/option part.

Suitable for all FG Monster models with twin shock setup. Four mm wire diameter, links with 12 mm hole spacing.

Fit not for FG 4WD Models.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

7154 FG Body mount adjustable, 1 pce.

Adjustable body mount with heigt-adjustable body support.Measures:Length 110 mmDiameter 8 mm10 mm at the baseFor all cars and body shells.

€9.95*

7152/01 FG Extended rear mount

Genuine FG spare/option part. Fits all touring cars and Porsche 530.( Not for Mini Cooper und Porsche 465/510.)Contents:1 piece

€19.90*

7155 FG Body mount short adjustable

Genuine FG spare/option part. Adjustable body mount with heigt-adjustable body support.Dimensions:Length: 55 mmDiameter: 8 mmThe Base: 10 mmFor all cars and body shells.Contents:1 piece

€9.95*

7093 FG Silicone o-ring - 12pcs.

Inner diameter 4 mmThickness 2 mm

€6.90*

7152/02 FG Body mount front - 2pcs.

Total length: 60mmLength until body support: approx. 50mm

€8.50*

7103/08 FG Distance bush for front upright

Genuine FG spare/option part.The installation of these spacer bushings between the ball bearings in the uprights allows you to tighten the wheel nut strongly. Suitable for all FG plastic and alloy uprights.Dimensions:Outer diameter: 11 mmWidth: 7 mmInner diameter 8,22 mmContents:2 pieces

€3.90*

7143 FG/Carson/Smartech Tank mounting for Zenoah tank - 2pcs.

Suitable for .

€23.90*

7100 FG Adjusting clip for 16 mm axle, 16 pcs.

These adjusting clips allow a faster adjustment of the wishbones. Suitable for front and rear suspension. The set contains 16 adjusting clips in 2 and 6mm size for 6 mm axles.

€9.50*

7102 FG Front wishbone pin - 2pcs.

6 x 87 mm

€9.90*

7106 FG ATS rim silver 65mm - 2pcs.

Suitable for all FG 1:5 models and other makes.Rim with 18 mm square driveRim width: 65mmRim diamter: 95mmColour: Silver

€20.70*

7154/01 FG Body mount adjustable 80mm

Genuine FG spare/option part.Adjustable body mount with heigt-adjustable body support.Fits RC-models and bodies.Contents:1 set

€9.95*

7098 FG Front axle trestle - 1pce.

€7.80*

Customers also viewed

7071/06 FG Stabilizer 5 mm rear

Genuine FG spare/option part. Suitable for all 1:5 models, Race-Trucks and Monster models to optimize the road performance.Contents:1 piece

€17.50*

7096 FG Front stabilizer - 1pce.

Suitable for the 1:6 models Marder, Beetle On-/Off-Road, Pajero and Monster.3 mm wire diameter, links with 12 and 29 mm hole spacing.Fit not for FG 4WD Models. 4wd Stabilizer you find here:6626066261

€19.70*

7756 FG Air cleaner for Zenoah

Genuine FG spare/option part.Air filter has integrated choke. Not for offroad use!Contents:1 piece

€31.90*

5020/01 FG Front bumper Porsche GT2/GT3

Genuine spare/option part.Suitable for FG Porsche GT2/GT3 body.Dimensions:Length: 340 mmWidth: 115 mmContents:1 piece

€34.95*

7071/01 FG Stabilizer 5mm rear

Genuine FG spare/option part. Suitable for all 1:5 models, Race-Trucks and Monster models to optimize the road performance.Contents:1 set

€16.90*

y1320 Narrow-Grip 616 type drift tires, mounted and with 24 mm hex for Losi, HPI, MCD

The off-road tire for hard packed dirt and spectacular drifts!Gives great results on those carpets which are typical for some off-road tracks. 616 grippy square studs per tire, a total of more then 2.400 for a complete set of tires, guarantee maximum traction! The lower profile of the outer stud rows reduces lateral traction and guarantee exceptional directional stability and allows for spectacular drifts! Therefore the car is less prone to undesirable side rolls!The Narrow-Grip 616 tires are mounted on a flexible 10 spoke rim with steel ring reinforced 24 mm hex drive. 10 screws per beadlock ring keep the tires in place. The Narrow-Grip 616 tires feature a firm foam insert, making them suitable even for heavier weight cars.To prevent premature wheel drive wear the fit to the rim is very tight. Therefore the rim should be properly aligned with the hex drive and completely mounted via tightening the wheel nut! Attention: When using the Narrow-Grip wheels on a Super Losi Rock-Rey model, special wheel hexes are required. Also on FG and Carson models. For mounting on a Traxxas X-MAXX you need a set of special Top-Tuning wheel nuts. Both are available as an option from our shopping cart menu. Dimensions:Outer tire diameter: 180 mmTire and rim width: 60 mmRim inner diameter: 120 mmWeight for one tire: 430 grams / for a pair: 860 grams24 mm hex for Losi 5IVE-T, HPI Baja 5, MCD Wheels drives:24 mm hex for Losi 5IVE-T, HPI Baja 5 and MCD ccars.

€77.80*

Futaba Failsafe Unit, F 1650 - 1pce.

A small, lightweight electronic module which is connected between the receiver and one servo of your AM or FM radio control system. If the radio control system should fail, the receiver suffer interference, or the voltage of the receiver battery fall to a dangerous level, the servo connected to the unit moves to a pre-selected position, e.g. full brake, and thereby prevents motor damage through over-revving.

€69.90*