7020/05 FG Front bumper for CLK-DTM

€29.90*

Prices incl. VAT plus shipping costs

Available

Product number: fg_7020_05

EAN: 3410569693556

Product information "7020/05 FG Front bumper for CLK-DTM"

Genuine FG spare/option part.

Suitable for CLK-DTM.

Dimensions:

Length: 100 mm
Width: 360 mm

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Customers also bought

8140 FG Alloy plate for front axle - 1pce.

Item N° 8140 Alloy plate for front axle - 1pce.Alloy plate for front axle on touring cars.

€11.50*

5341/10 FG Engine housing A chromed

Genuine FG spare/option part. Spare part for all Chung-Yang and Zenoah engines. Contents:1 piece

€37.90*

y0730/02 Special wear resistant organic replacement pad

Genuine GPM spare/option part. Use a high strength two-component adhesive (e.g. Clutch-Safe) to glue in the pads and lock them with the countersunk screws M3x5 (part no. y0730/03)Part no. 02 for GPM Big-Scale clutch.For replacing the friction pads please proceed as follows:1. Remove clutch from engine2. Disassemble clutch3. Remove the screws fixing the friction pads4. Remove remains of old glue and clean the surface to be bonded of the shoes to bare metal 5. Thoroughly degrease the bonding area of clutch shoes and new pads6. You must use the special adhesive y0743 Clutch-Safe!7. Apply a sufficient and complete layer of the adhesive to the bonding surfaces8. Insert the lining into the clutch shoe and align9. Fix the pad in place with screw y0730/03, just hand-tighten it10. Remove excessive glue with a rag11. Preheat oven to 120 °C.12. Put the clutch shoes into the preheated oven for exactly one hour; let the parts cool down13. Reassemble clutch and install it onto the engine14. Wait at least one hour after the gluing process before using the clutchy0730y0731Content:3 pieces

€19.90*

Details

y0305 Colored flexible fuel line, top quality, 1 meter

y0305 Color: y0305/02 - Blue

High quality flexible fuel line in your choice of blue, red, yellow, orange and green. Size:Length: approx. 1 meterOuter diameter: approx. 6.3 mmInner diameter: approx. 3.2 mmDiameters are 100% identical to the Zenoah Tygon hose #7352!

€5.90*

6029/08 FG Ball-and-socket joint for M8

Genuine FG spare/option part. Reinforced plastic ball-and-socket joints for M8 thread rods. Replacement for the plastic ball-and-socket joints 6029/01.Fits 10 mm balls, total length 39 mm.Contents:4 pieces

€12.90*

- GWH04-XM1 GRP W04 REVO XM1 Tyres Soft

This pair of Tyres have the following use indications: GOOD GRIP situation for clean track. GOOD GRIP situation for medium asphalt. GOOD GRIP situation for medium temperatures. This pair of Tyres have the following technical features: REVO treated profile for the maximum traction and the maximum lateral grip. Treated profile studied to maintain the tyre surface alway clean from rubber murble. Compound exclusively developped for model tyres. Inside belt flexible but very strong, vulcanized directly together with tyre compound. Insert foam with special material for high temperatures, for maximum stability and high drive precision. Spoked wheel moulded with special material for high temperatures for maximum grip and stability. Special gluing system 100% guaranteed.The main sizes for this tyre are: WHEEL fixing with square 18mm. TYRE outside diameter 118mm. WHEEL inside diameter 90mm. TYRE tota width 65mm. Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability. Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!

€38.90*

Details

Similar products

7011 FG Front body mount

Genuine FG spare/option part. Fits FG Ecoline and Sportsline with the following body shells:2049 McLaren2064 Ferrarie 3604049 Audi A47164 ITC Mercedes7169 Peugeot7249 Mercedes CLK-DTM7254 Honda7259 Opel V88044 BMW 3201049 Ren. Megan5049 New Beetle5064 Chrysler Viper5154 Porsche GT25160 Porsche GT39149 Mercedes CLK-GTR9159 Porsche GT19054 Mercedes C291Contents:2 pieces

€6.90*

7011/01 FG Front body mount high

Genuine spare/option part.Suitable for BMW M3 GTR body shell.Contents:2 pieces

€6.90*

7014 FG Rear body - 2pcs.

All measures in millimeters.

€14.90*

7020/15 FG Front bumper for BMW M4

Genuine FG spare/option part. Plastic Rammer for fixing the front body mounts for the BMW M4.Dimensions:Length: 120 mmWidth: 390 mmContents:1 piece

€29.90*

7014/01 FG Rear body mount for C-Class

Genuine FG spare/option part. Passend für C-Class.Contents:2 pieces

€14.90*

7020/16 FG Front bumper for Audi R8

Genuine FG spare/option part. Suitable for Audi R8.Dimensions:Length: 130 mmWidth: 355 mmContents:1 piece

€29.90*

7028/01 FG Track rod left/right for 1:5 65 mm, 2 pcs.

Genuine FG spare/option part.Alloy track rod.

€12.90*

7020/14 FG Front bumper for Audi RS5/Porsche 962C

Genuine FG spare/option part. Plastic Rammer for fixing the front body mounts for the Audi RS5.Dimensions:Length: 125 mmWidth: 390 mmContents:1 piece

€29.90*

7035 FG Engine mount big, 1pce.

Item N° 7035 Engine mount big, 1pce.Plastic engine mount suitable for all 1:5 models except Evo/Competition and Formula 1.Also available in .

€14.90*

7020/12 FG Front bumper for Audi A4 and BMW ALMS

Genuine FG spare/option part. Fits Audi A4 and BMW ALMS body shell.Not suitable for BMW M3 ALMS Superstar.Dimensions:Length: 107 mmWidth: 387 mmContents:1 piece

€29.90*

7020/13 FG Front bumper for DTM 06

Genuine FG spare/option part. Plastic Rammer for fixing the front body mounts for the Mercedes C-Claas DTM 06.Dimensions:Length: 111 mmWidth: 382 mmContents:1 piece

€29.90*

7010/01 Alloy chassis long - 1pce.

Aluminum chassis plate for Sportsline (bevor 2011) and Ecoline onroad car, also electro challene lineWheelbase 535 mmLength 675 mmWidth 198 mm

€133.95*