Genuine rc-car-online spare/option part. Very high quality Torx screwdriver blades with ¼ hexagon shaft and engraved size indication.The complete set consists of:Eight with in the following sizes: T6, T7, T8, T9, T10, T15, T20, T25Handle with magnetic ¼ hexagon socket to accept the Torx bladesThese are the most usual Torx sizes required for working on rc-cars.The ergonomically shaped handle features a magnetic ¼ hexagon socket, a polished surface and a cross bore.Unit price: 53,10 EUR.Contents:1 set
This is the G260 in the 26 cm³ version.The engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch and / or ball beard carburetor are optionally available at additional charge. Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise. Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.
Item N° 68407 Aluminium differential .fourfold self-lock 4WD, setThrough locking of the drive wheels with friction washers the drive wheels have a higher torque. Additional this differential can also be locked mechanically by set screws.Suitable for the 1:5 Sportsline 4WD Touring car models and the 4WD 1:6 Buggy and Monster models. For the assembly you need the rear axle cover Item N°. 68407/01.
€236.95*
This website uses cookies to ensure the best experience possible. More information...