EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm
Go to homepage
Quick shipping until 14 o'clock
PartScout
€0.00*
Quick shipping until 14 o'clock

6920/18 FG Countersunk screw with Torx M4 x 18mm, 10 pieces

Skip image gallery

€5.70*

Prices incl. VAT plus shipping costs

Available

Product number: fg_6920_18
EAN: 3410564513521

Product information "6920/18 FG Countersunk screw with Torx M4 x 18mm, 10 pieces"

Genuine FG spare/option part.

Part is delivered in silver or black color from vendor!

Content:
  • 10 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Customers also bought

y6479 HT rear alloy upright
y6479 HT rear alloy upright
Genuine HT spare/option part.Alloy upright for a ball fastening at the upper wishbone. Adjustable at the lower wishbone (hinge pin), too. Fits the rear axle of all FG and Carson / Smartech 1/6 scale cars.Comes with adjustment clips and grub screws for the hinge pins included.Dimensions:Bearing seats: 22 x 7 mmHinge pin bore: 6 mmDistance wheel shaft/hinge pin: 25 mm Contents:2 pieces

€89.90*
TT0990 Top Tuning Failsafe with kill switch and status LED for all transmitters
TT0990 Top Tuning Failsafe with kill switch and status LED for all transmitters
Genuine TT spare/option part.The new and improved failsafe modul.This kill switch module works with most FM and 2.4 GHz rc-systems. Not compatible with AVC-equipped receivers! You must have a free channel on your rc-system in order to install the module! This means at least a 3-channel radio for standard 1-servo brake/throttle setups or a 4-channel radio for dual brake servos driven by the radio's mixer function. With this module you can stop the engine with your radio. Additionally the module features a failsafe function which stops the engine when the rx-battery's voltage drops below a certain level or the rc-system has a glitch. A kill switch module fulfils two tasks. On the one hand, as a safety device, it is intended to shut off an engine with magneto ignition in case of failure of the remote control, and on the other hand, the engine can be stopped at any time by remote control.While the latter is mainly used for convenience, the safety aspect is what really matters.The failsave circuit integrated in all modern remote controls may brake the vehicle in the event of a radio interference, but this feature is dependent on the basic functionality of the receiver system and its power supply. However, if the receiver, the gas servo or the power supply fails completely, the failsave of the remote control can no longer do its job. The vehicle may be running haywire at full throttle.In these cases, the kill switch will cut the ignition of the engine and the vehicle will roll out without power.Features:Ready to install no soldering requiredRemote LED for easy-to-spot operational status (ignition live/killed)Optically coupled to isolate the ignition from the radio systemThreshold value for undervoltage protection (4V, 5V, 6V) adjustable with jumpers allows adaptation to the rx-battery type (LiPo, LiFePo, NiMH, NiCd)Contents:1 piece

€54.90*
Details
6431/01 FG Steel pinion 16 teeth, wide - 1pce.
6431/01 FG Steel pinion 16 teeth, wide - 1pce.
Item N° 6431/01 Steel pinion 16 teeth, wide - 1pce.For use on the clutch bell of FG monster cars.Diameter 26.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5

€33.90*
6047/01 FG Steel pinion 15 teeth wide, 4WD
6047/01 FG Steel pinion 15 teeth wide, 4WD
Genuine FG spare/option part. True running steel pinion for minimized wear. Application: All FG cars except Formula 1.Dimensions:Diameter: 26,7 mmBore: 10 mmTotal width: 18 mmTooth width: 11.5 mmModule: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.Contents:1 piece

€31.50*
7432/25 FG Steel gearwheel hardened 25 teeth
7432/25 FG Steel gearwheel hardened 25 teeth
Suitable for 39, 40 and 41 teeth main gear wheel.Measures:Diameter: 38,7 mmBore: 10 mmTotal width: 18 mmTooth width: 11,5 mmModule: m=1.5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.Content:1 piece

€34.50*
6920/14 FG Countersunk screw with Torx M4x14 mm, 10 pieces
6920/14 FG Countersunk screw with Torx M4x14 mm, 10 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:10 pieces

€5.70*

Similar products

6920/14 FG Countersunk screw with Torx M4x14 mm, 10 pieces
6920/14 FG Countersunk screw with Torx M4x14 mm, 10 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:10 pieces

€5.70*
6920/08 FG Countersunk screw with Torx M4x8 mm, 10 pieces
6920/08 FG Countersunk screw with Torx M4x8 mm, 10 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:10 pieces

€4.60*
6920/12 FG Countersunk screw with Torx M4 x 12 mm, 10 pieces
6920/12 FG Countersunk screw with Torx M4 x 12 mm, 10 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:10 pieces

€5.70*
6920/16 FG Countersunk screw with Torx M4x16 mm, 10 pieces
6920/16 FG Countersunk screw with Torx M4x16 mm, 10 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:10 pieces

€5.70*
6920/06 FG Countersunk screw with Torx M4x6 mm, 10 pieces
6920/06 FG Countersunk screw with Torx M4x6 mm, 10 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:10 pieces

€3.90*
32430 Countersunk screw TPF 4x8mm - 5pcs.
32430 Countersunk screw TPF 4x8mm - 5pcs.
Part is delivered in silver or black color from vendor!

€2.20*
Details
LOS255017 Losi Flat Head Screws, M4 x 16 mm
LOS255017 Losi Flat Head Screws, M4 x 16 mm
Genuine Losi spare/option part. Contents:10 pieces

€5.99*
y6920/16-10.9 Countersunk screw with Torx M4 x 16 mm, strength 10.9, 10 pieces
y6920/16-10.9 Countersunk screw with Torx M4 x 16 mm, strength 10.9, 10 pieces
Genuine HT spare/option part.Part is delivered in silver or black color from vendor!Content:10 pieces

€5.70*
TLR255013 TLR Flat Head Screws M4 x 12 mm
TLR255013 TLR Flat Head Screws M4 x 12 mm
Genuine TLR spare/option part.Dimensions:M4 x 12 mmContents:10 piecest

€4.99*
6920/10 FG Countersunk screw with Torx M4 x 10 mm, 10 pieces
6920/10 FG Countersunk screw with Torx M4 x 10 mm, 10 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:10 pieces

€4.60*
Details
6720/25 FG Countersunk screw M4x25 mm, 10 pieces
6720/25 FG Countersunk screw M4x25 mm, 10 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:10 pieces

€3.50*
y6920/20-10.9 Countersunk screw with Torx M4 x 20 mm, strength 10.9, 10 pieces
y6920/20-10.9 Countersunk screw with Torx M4 x 20 mm, strength 10.9, 10 pieces
Genuine HT spare/option part.Part is delivered in silver or black color from vendor!Content:10 pieces

€5.70*

Customers also viewed

LOSR5017 Losi Sparkplug, for Losi 23/26/29 cm³
LOSR5017 Losi Sparkplug, for Losi 23/26/29 cm³
Genuine Losi spare/option part.Fits Losi 5ive-T and 5ive Mini.Replacement part for Losi 23/26/29 cm³ engine with item number: LOSR5001.Content:1 piece

€19.99*
6925/08 FG Pan-head screw with Torx M4x8 mm, 10 pieces
6925/08 FG Pan-head screw with Torx M4x8 mm, 10 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:10 pieces

€5.40*
This website uses cookies to ensure the best experience possible. More information.... By clicking on "[Agree / Accept all / etc.]" you also give your consent to the disclosure of your behavior in our store to our partner, shopware AG (Ebbinghoff 10, 48624 Schöppingen, Germany), which cannot assign this data to you personally, but may process it for its own purposes (e.g. product improvements, market behavior analyses).
Upload in progress, please be patient ...
Shopware-Agency Shopware-Agency