66286, FG Plastic mounting plate, front Off-Road Buggy 4WD,1 pce.

€3.80*

Prices incl. VAT plus shipping costs

Available

Product number: fg_66286

EAN: 3410564530788

Product information "66286, FG Plastic mounting plate, front Off-Road Buggy 4WD,1 pce."

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Alternatives

y0579, Alloy roll cage bracket for FG Off-Road Buggy 4WD, 1 pce.

Aluminum roll cage bracket for FG Off-Road Buggy 4WD, replaces stock plastic part FG #66286.Stock mounting hardware will be re-used.

€27.90*

Similar products

66270/03, FG Plastic steering stop for 2WD/4WD, 2 pcs.

Genuine FG spare/option part. Measures:Length: 40mmDiameter: 10 mmFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€7.90*

66271, FG Ball bearing 17x26x7, 2 pcs.

€18.60*

66287 FG Shock tower front 2WD/4WD

Genuine FG spare/option part. FG Shock tower front 2WD/4WDFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.Contents:1 piece

€9.90*

Details

66271/06 FG ball bearing 17x26x7 sealed, 2 pcs.

Genuine FG spare/option part.

€15.50*

66288/01 FG Aluminum brace long Off-Road Buggy WB 535, 2 pcs.

Item N° 66288/01 Aluminium brace long Off-Road Buggy WB 535, 2 pcs.

€17.90*

66288, FG Alloy brace, long, Off-Road Buggy 4WD, 2 pcs.

285x10mm.

€17.90*

66287/02 FG Headless pin M5x45mm - 2pcs.

Headless steel pin M5x45mm

€3.90*

66285, FG Reinforcement plate, front, 4WD, 1 pce.

€15.90*

66285/01, FG Alloy spacer hex 10x7, 2 pcs.

€5.50*

66270/01, FG Alloy front upright (fits l/h + r/h), 2WD/4WD, 1 pce.

Genuine FG spare/option part.

€74.95*

66270/02, FG Alloy steering arm for front upright, 2WD/4WD, 1 pce.

€44.95*

66275/05 FG Front cardan shaft 4WD

Genuine FG spare/option part.Contents:1 piece

€58.95*

Customers also viewed

66287 FG Shock tower front 2WD/4WD

€9.90*

Details

y0578, Alloy front shock tower for FG Sportsline and Off-Road 4WD, 1 pce.

Aluminum front shock tower for FG Off-Road Buggy and Sportsline 4WD, replaces stock plastic part FG #66287.Stock mounting hardware will be re-used.

€59.90*

FG Off-Road Buggy WB535 4WD HT-Edition

The FG Off-Road Buggy WB535 4WD is presented with a longer wheelbase and a pleasant design. Are you setting value on a well-blanced driving performance with quarantees enough grip and driving fun as well as on functionality and visual appearance? Then the new Off-Road Buggy WB535 is your best choice. Painted body shell to choose, all-wheel-drive, completely mounted ready-to-drive, combined with the open Off-Road Buggy body shell with metal roll cage and gigantic Off-Road rims with low-profile knobbed tires.The body painted either finished or unpainted. The body shell is standard unpainted. Equipped with a 26cm³ engine the Off-Road Buggy is aggressive and also a tremendous jumper. The 35 mm wheelbase extension results in a higher tracking stability. Additionally the 4WD grants the model the maximum driving power and highest fun factor on every surface and in all curves.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Equipment of the modelAngled 4 mm, alloy chassis, completely covered belt drive, two differential gears at front and rear axle with hardened bevel gearwheels, closed front axle housing, front bumper, double wishbones at front and rear axle, gear brake, adjustable right/left thread rods at the track rods and at the front and rear wishbones, front uprights with steering stops, gearwheels made of case-hardened steel, completely ballbeared, four large-volume oil-pressure shock absorbers, receiver box.HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURDriveshaft bootsProtect ball drive as well as cardan drive against dirt. 4 pairs / 8 piecesValue: 42,90 EURAlloy spur gear carrierUse for 46T - 48 teeth spur gears.Value: 39,90 EURTotal value: 200,30 EURAccording to side rails and the closed body shell the Off-Road Buggy is almost protected against dirt from underneath. The two-parts body shell is made of polycarbonate, the rear spoiler is made of impact resistant polyamide. Driver´s coverage and roll cage parts are made of aluminum. The giant low-profile knobbed tires are glued on black rims.The model is equipped with a powerful 26cm³ (series) combustion engine with ready-for-use oiled air filter. The engine runs with normal 2-stroke petrol-oil mixture (available at every patrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-stat system the engine can be started without any difficulties. The RTR version is delivered with installed and preset radio control system and rechargeable batteries. To complete the non-RTR version all popular servos and radio control systems are suitable.The pictures may display the car with some optional items which are not included, like bed-mounted rollbar, lights, front bumper or mirrors. These items can be added in the drop down menus.Measures:Length: 770 mmWidth: 480 mmHeight: 280 mmWheelbase: 535 mmWeight: 10,8 kg

€1,139.95*

Configure now

9440/31 Brake line black 1m - 1pce.

Spare part for .These parts are not more available from manufacturer, alternative you can convert complete to the 4mm lining system.To convert the lining of one brake/axle the following parts will be required:1x 4mm brake lining 1mT-connector 1x 90° angle connector3x More parts of this 4mm brake lining system you find here:

€6.90*