66258/07 FG Adjusting screw f. locking diff. 30mm, 2pcs.

€4.60*

Prices incl. VAT plus shipping costs

Available

Product number: fg_66258_07

EAN: 3410564537657

Product information "66258/07 FG Adjusting screw f. locking diff. 30mm, 2pcs."

Item N° 66258/07
Adjusting screw f. locking diff. 30mm, 2pcs.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Customers also bought

y1588 Aluminum receiver antenna mount

Genuine rc-car-online spare/option part. Versatile aluminum bracket for easy installation in panels or RC boxes with up to 4 mm wall thickness. Only a 6 mm hole is required and the bracket is fastened with the included nut. Alternatively, for installation in thicker material an M6 thread can be tapped as well. An O-ring provides a seal when installed in RC boxes.The bracket has a stepped hole into which the common antenna tubes of about 3.2/3.3 mm diameter can be inserted, but not pushed through. The hole for the antenna cable has a diameter of approx. 2.5 mm.The height of the bracket above the mounting surface is 16 mm.The scope of delivery includes an end cap and two antenna tubes with a length of approx. 170 mm.Contents:1 set

€9.90*

y0442 HT rim reinforcement all FG-Monster and Stadium rims

Genuine HT spare/option part.Rim reinforcement, transfers the load over a larger diameter into the rim and protects the rim's square. Will also allow for the use of rims with an already damaged square.For FG Monster- and Stadium rims 6232, 6232/01, 6232/03, 6232/04, 6232/05 and 6232/06.14 mm wide square drives must be used.Please note:When installed with new (unused) rims, it may be necessary to modify the rim's square slightly.Contents:2 pieces

€29.90*

y1312 Twin hose bracket

Twin hose bracket for hoses up to 7 mm outer diameter. With 5 mm hole for installation by screw or cable tie.Keeps your car's fuel lines in place. Especially helpfull with tuned pipe layouts running close to the engine.Screws with part number #6726/25 are recommended for installation on the fan cover.

From €14.90*

Details

y804 HT-flange sealer 518, 50 ml up to 200°C

Especially for installation of all engine gaskets. Temperature resistant from -55 °C to +200 °C. Resistant to water, mineral oils, synthetic lubricants, fuels, organic solvents and refrigerants. info: Hand tight: 10 - 20 minReady to use: 1 - 3 hoursGap fill: 0.5 mmContent: 50 ml Notes for usage: This surface seal is not for use as the sole sealant, it should always be applied in combination with a paper gasket.The HT-surface sealing agent should be sparsely applied over the entire surface, with care being taken that the sealant does not enter the devices internals (e.g. crankcase, differential a.s.o.) during the assembly.

Content: 50 Milliliter (€538.00* / 1000 Milliliter)

€26.90*

94529 HPI Flat head screw M4 x 10 mm

Genuine HPI spare/option part. Dimensions: M4 x 10 mm, 2,5 mm with allen head.Part is delivered in silver or black color from vendor!Contents:10 pieces

€2.30*

Details

7154 FG Body mount adjustable, 1 pce.

Adjustable body mount with heigt-adjustable body support.Measures:Length 110 mmDiameter 8 mm10 mm at the baseFor all cars and body shells.

€9.95*

Similar products

66288/01 FG Aluminum brace long Off-Road Buggy WB 535, 2 pcs.

Item N° 66288/01 Aluminium brace long Off-Road Buggy WB 535, 2 pcs.

€17.90*

66288, FG Alloy brace, long, Off-Road Buggy 4WD, 2 pcs.

285x10mm.

€17.90*

66286, FG Plastic mounting plate, front Off-Road Buggy 4WD,1 pce.

€3.80*

66270/03, FG Plastic steering stop for 2WD/4WD, 2 pcs.

Genuine FG spare/option part. Measures:Length: 40mmDiameter: 10 mmFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€7.50*

66271, FG Ball bearing 17x26x7, 2 pcs.

€18.60*

66287/02 FG Headless pin M5x45mm - 2pcs.

Headless steel pin M5x45mm

€3.90*

66270/02, FG Alloy steering arm for front upright, 2WD/4WD, 1 pce.

€45.90*

66285/01, FG Alloy spacer hex 10x7, 2 pcs.

€5.50*

66287 FG Shock tower front 2WD/4WD

Genuine FG spare/option part. FG Shock tower front 2WD/4WDFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.Contents:1 piece

€9.50*

66514/02 FG Engine mounting plate for FG Marder

Original FG Ersatz-/Tuningteil.Inhalt:1 Stück

€35.90*

66270/01, FG Alloy front upright (fits l/h + r/h), 2WD/4WD, 1 pce.

Genuine FG spare/option part.

€75.90*

66275/05 FG Front cardan shaft 4WD

Genuine FG spare/option part.Contents:1 piece

€65.50*

Customers also viewed

66258, FG Plastic thrust disk r/h 4WD, 1 pce.

€9.30*

8496/02 FG Adjustment screw - 2pcs.

Item N°8496/02 Adjustment screw - 2pcs.Spare part for .Total length: 23 mmThread: M5Pin: 4 mmPart is delivered in silver or black color from vendor!

€5.90*

4169 FG Audi R8 body shell complete , Wheelbase 535 mm

Genuine FG spare/option part. Fits on all standard width touring car chassis' with 535 mm wheelbase, FG, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase. The body shell is vac-formed from 2 mm Lexan. The vehicle decal sheet can be purchased separately in our shop selection.Required body mounts:Mount front: FG 7020/16Rear body mount: FG 7152/01 Rear body mountSide body mount front: FG 3014 Body mountsSide body mount rear: FG 3014 Body mountsFront body: 4171 FG Front body Audi R8 clearRear wing: 4172 FG Rear wing Audi R8 clearVehicle decals: 4173/01 FG Vehicle decals Audi R8 LMSDimensions:Length: 920 mmWidth: 385 mmHeight: 220 mmWheelbase: 535 mmContents:1 set

€229.95*

y1588 Aluminum receiver antenna mount

€9.90*

1000-66 Mecatech DOT-5 brake fluid 50ml

Genuine Mecatech spare/option part. Replacement part for Mecatech twin piston hydraulic brake.Contents:1 piece / 50ml

Content: 50 Milliliter (€218.00* / 1000 Milliliter)

€10.90*

6096 FG Shock retaining screw M5

Genuine FG spare/option part.Suitable for all FG models for lower damper fastening except monster/stadium models with dual shock axles.Part is delivered in silver or black color from vendor!Dimensions:Length 23 mmThreaded length 7 mmShaft diameter 3.7 mmContents:4 pieces

€11.90*