66243 FG Bolt for battery bracket 4WD

€3.50*

Prices incl. VAT plus shipping costs

Available

Product number: fg_66243

EAN: 3410564530504

Product information "66243 FG Bolt for battery bracket 4WD"

Genuine FG spare/option part.

Contents:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Customers also bought

500900149 Carson Tyre set On-Road series

cs_500900149 Units: 2 pairs / 2 pieces+ 45EUR

Genuine Carson spare/option part. Fits models with a 22 mm hex drive.Contents:1 pairs / 2 pieces

Variants from €48.99*

€93.99*

y0670 HT Color Ex color remover 100 ml

Special remover for Lexan (Polycarbonate) and for X- and XF-color, AS- and TS-color and many more painting system until 2-K color. Does not damage the body shell!For small corrections soak a cotton swap with Color ex. Use a lint-free cloth for large area applications.Color Ex comes in a glas bottle with child-proof bottle top.Contents:100 ml / 1 piece

Content: 100 Milliliter (€99.50* / 1000 Milliliter)

€9.95*

TT0990 Top Tuning Failsafe with kill switch and status LED for all transmitters

Genuine TT spare/option part.The new and improved failsafe modul.This kill switch module works with most FM and 2.4 GHz rc-systems. Not compatible with AVC-equipped receivers! You must have a free channel on your rc-system in order to install the module! This means at least a 3-channel radio for standard 1-servo brake/throttle setups or a 4-channel radio for dual brake servos driven by the radio's mixer function. With this module you can stop the engine with your radio. Additionally the module features a failsafe function which stops the engine when the rx-battery's voltage drops below a certain level or the rc-system has a glitch. A kill switch module fulfils two tasks. On the one hand, as a safety device, it is intended to shut off an engine with magneto ignition in case of failure of the remote control, and on the other hand, the engine can be stopped at any time by remote control.While the latter is mainly used for convenience, the safety aspect is what really matters.The failsave circuit integrated in all modern remote controls may brake the vehicle in the event of a radio interference, but this feature is dependent on the basic functionality of the receiver system and its power supply. However, if the receiver, the gas servo or the power supply fails completely, the failsave of the remote control can no longer do its job. The vehicle may be running haywire at full throttle.In these cases, the kill switch will cut the ignition of the engine and the vehicle will roll out without power.Features:Ready to install no soldering requiredRemote LED for easy-to-spot operational status (ignition live/killed)Optically coupled to isolate the ignition from the radio systemThreshold value for undervoltage protection (4V, 5V, 6V) adjustable with jumpers allows adaptation to the rx-battery type (LiPo, LiFePo, NiMH, NiCd)Contents:1 piece

€37.90*

5014/05 FG Bolt for battery holder

Genuine FG spare/option part.Plastic bolt for battery holder.Contents:2 pieces

€5.90*

10012 FG Body bolts - 2pcs.

Suitable for all saleable batteries. These are fixed with insulating tape.

€3.40*

y3010 Genuine Zenoah decals set

Genuine Zenoah decals set with a total of 32 decals in different colors and sizes.Decal sheet dimensions:Width: 298 mmHeight: 210 mmDecals dimensions:Size one: width: 175 mm, height: 47 mmSize two: width: 105 mm, height: 30 mmSize three: width: 55 mm, height: 15 mmSize four: width: 40 mm, height: 10 mmSize five: width: 30 mm, height: 8 mm

€4.90*

Similar products

66254, FG Axle shaft 6x50mm 4WD, 1 pce.

€4.30*

66223, FG Plastic bearing carrier 4WD

Genuine FG spare/option part.Contents:2 pieces

€5.50*

66211 FG Gear cover 4WD

Genuine FG spare/option part. Contents:1 piece

€6.90*

66266, FG Alloy a-arm, front upper 4WD, 1 pce.

Alternative: y2002 Alloy a-arm, front upper FG 4WD - Fits FG Leopard 4WD und Sportsline onroad 4WD with 510mm wheelbase.Does not fit FG Leopard 2WD und Sportsline onroad 4WD with 530mm wheelbase.

€39.95*

66256, FG Plastic cog belt pulley front 42T. 4WD, 1pce.

€23.90*

66222, FG Axle for tensioning pulley case, 4WD, 1pce

32mmx10mm mit 4mm tread

€5.30*

66267 FG Turnbuckle M10/M8x66mm, 2WD/4WD, 2 pcs.

M8 r/h thread / M10 l/h threadFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€19.50*

66245 FG Steel ball 7 mm

Genuine FG spare/option part. Bore 3 mm.Contents:4 pieces

€5.30*

66210 FG Rear axle cover 4WD

Genuine FG spare/option part. Contents:1 piece

€10.95*

66250/01, FG Bracket f. stabilizer bar front 2WD/4WD, 2 pcs.

For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€3.50*

66207, FG Plastic cog belt pulley, rear 42T. 4WD

Genuine FG spare/option part.Contents:1 piece

€23.90*

66217 FG Steel pinion 14T narrow, 1pce.

Item N° 66217 Steel pinion 14T narrow, 1pce.Layshaft pinion for FG 4WD cars, 10 mm bore diameter, tooth width 9.25 mm, total width 15.6 mm, outer diameter 25.7 mm.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.

€29.95*

Customers also viewed

y0733 Big Scale-EXTREME, adjustable 3 - shoe clutch

With the Big Scale-EXTREME an adjustable clutch for very special requirements has been designed:For large-displacement enginesFor heavy or high traction cars (Losi, HPI)For modified performance enginesFor the demanding off-road useRapid wear of a clutch is a sign of constant slipping, even beyond engagement speed. In this case, the clutch does not transfer the applied torque.This is where the Big ScaleEXTREME sets a new standard.The new design of the "Extreme" prevents the centrifugal forces of clutch springs or lever side of the clutch shoes from counteracting the centrifugal force of the friction pad side even after engagement.As a result this clutch can transfer lots of power with minimal wear.The new design ensures that the centrifugal forces are transferred in full to the clutch lining. Precise engagement and disengagement even under high loads and inside of closed clutch bell carriers means no problem for this clutch.The clutch can be easily adjusted to the engagement speed through three set screws without clutch bell removal, so you can match the characteristics of your engine.The special clutch lining of the Big Scale-EXTREME is particularly wear-resistant and - especially in combination with a high-quality nitrited clutch bell (), guarantees for an exceptionally long service life! Contrary to the "Cross" or "Race" version there's no need to uninstall the clutch from the engine for maintenance. All parts are easily accessible from the front after removing the front plate.Please see the specifications tab for further information and handling advices!The regular price of the Big Scale-EXTREME is EUR 139.90

€149.90*

8014 FG Body mount, side, rear, for Alfa Romeo, Calibra and GTR

Genuine FG spare/option part. Contents:2 pieces

€13.90*

10012 FG Body bolts - 2pcs.

Suitable for all saleable batteries. These are fixed with insulating tape.

€3.40*