6452/04 FG O-ring 19x1,5mm for air filter adapter - 2pcs.

€2.60*

Prices incl. VAT plus shipping costs

Available

Product number: fg_6452_04

EAN: 3410564508756

Product information "6452/04 FG O-ring 19x1,5mm for air filter adapter - 2pcs."

Spare part for 6452/05

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Customers also bought

6464/05 FG Foam filter oiled

Genuine FG spare/option part.Spare part for FG no.: 6464.Dimensions:Outer diameter 61 mmInner diameter 20 mmHeight 71 mmContent:2 pieces

€12.90*

y0851/01 Spark plug wrench, Zenoah / CY with T27 Torx

Original Zenoah spark plug wrench, especially for the tiny plugs from the CY / Zenoah G230/240/260/270.

€9.90*

VP99635 Transmitter Battery Li-Po 7,4V 2200mAh

2-Cell 7.4V 2200mAh LiPo Transmitter BatteryThis is a transmitter only, rechargeable LiPo battery pack that fits some Futaba transmitters and also other radio brands. Fits Futaba Transmitters: T4PM T4PLS T4GRS T4PV T4PX T6KT7PX T7XC (tight fit) T8J T10JT10PX T12K T14SG T16SZ T18SZ FX20 FX36 Make sure the transmitter battery settings are for 2S LiPo with alarm cut-off set to 6.4 volt. Specs: Type: LiPo Transmitter Battery Power Connector: Futaba Power Wire: 22AWG Balance Connector: JST-XH Battery: 2S1P LiPo Nominal Voltage: 7.4V/2S Max Charge Voltage: 4.2V/Cell Mac Charge Current: 2.2A (1C) Capacity: 2200mAh Energy: 16Wh Storage Voltage: 3.7-3.8V/cell Size: Length: 73mm Width: 45mm Thickness: 15.5mm Weight: 98g Tech Notes: Charge the battery outside the transmitter with a LiPo balance charger equipped with an Futaba adapter lead and XH balancing connector Set the charger to "LiPo", 2s, 3.7v/cell

€28.90*

Details

y0715 rc-car-online High tech mechanics gloves, nitrile, black

Genuine HT spare/option part. With non-slip surface perfect for delicate work, actually improving dexterity and grip.Available sizes: 8, 9 and 10.Glove size?Size 8 = 21 cm (S - L) circumferenceSize 9 = 24 cm (L - XL) circumferenceSize 10 = 27 cm (XL - XXL) circumferenceMeasure the circumference of your hand without the thumb and at the widest point (above the ankle). The tape measure should embrace the hand loosely.Norm EN388, Lining 100% polyamide.Partially coated with hightech nitrile Fits like a second skinGrips even when wetGood touch sensitivityLiquid-repellentGood resistance against oil and greaseContents:1 pair / 2 pieces3 pairs / 6 pieces

€8.90*

y0518 Hobbythek service bag

Genuine HT spare/option part. Special fabric bag to protect engines, rc-plates or other expensive items. Large opening and pull-string closure.Size:Diameter 200 mmHeight 200 mmContents:1 pieceAccessories not included.

€7.90*

y0950 Spark plug, Champion RZ7C, 3 pcs.

Genuine Champion spare/option part.OEM spark plug for Zenoah G230/240/260/270/290/320.Ideal too for PT, Chung Yang, Losi, HPI-Fuelie, Smartech, Nutech and Carson and other engines.The most widely used, qualitatively best spark plug for the model sport! Especially by the most 1/6 scale models the short ceramic body is indispensable, because otherwise on grounds of the heightened mounting position- the spark plug would protrude beyond the roll cage and therefore is extremely fragile by flashovers.Contents:3 pieces

€19.90*

Similar products

6431 FG Steel pinion 16 teeth

Genuine FG spare/option part.For combination with 48T main and differential spur gear.Diameter: 26.7 mmBore: 10 mmTotal width: 16 mmTooth width: 9.5 mmModule: m=1,5Contents:1 piece

€26.90*

6427 FG Plastic gear wheel 46 teeth - 1pce.

46 teeth gear wheel for the layshaft.Diameter 72 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5

€17.90*

6432 FG Steel pinion 18 teeth - 1pce.

Item N° 6432 Steel pinion 18 teeth - 1pce.For combination with 46T main spur gear.Diameter 29,7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5

€33.90*

6431/01 FG Steel pinion 16 teeth, wide - 1pce.

Item N° 6431/01 Steel pinion 16 teeth, wide - 1pce.For use on the clutch bell of FG monster cars.Diameter 26.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5

€33.90*

6429/01 FG Upright front for 1:6 2WD models

Genuine FG spare/option part.Reinforced version with steel inlay to prevent the M5 bolts from being pulled out.Bearing seats: 22 x 7 mm.Contents:2 pieces

€39.90*

6425/01 FG Stabilizer front/rear for 1/6 scale models

Genuine FG spare/option part.Fits for all 1:6 scale models except Monster-Truck, Monster Beetle Pro and Stadium-Truck. Not suitable for all 4WD cars.Dimensions:Front: 3 mmRear: 4 mmContents:1 set

€34.50*

6456 FG Airfilter adapter with choke for Zenoah

Genuine FG spare/option part. As spare parts for engines that have no built-in choke.Fits Zenoah G230/G240/G270RC/G290/ZG22.Content:1 piece

€23.95*

6437/05 FG Tire insert for slicks 63 mm 1:6

Genuine FG spare/option part.Fits for the 1/6 scale front tires. Dimensions:Width: 55 mmHeight: 13 mmLength: 385 mmContents:2 pieces

€13.90*

6451/03 FG Air filter adapter for Zenoah and CY, 1 pce.

Item N° 6451/03 Air filter adapter for Zenoah and CY, 1pce.These air filter adapters are needed fpr mounting the FG air and inlet silencers 6464, 6465 and the K+N air filters 6442 and 6460 as well as 9462 and 6466 on Solo, Zenoah and Tech engines.Fits: Zenoah G230/G240/G260/G270/G290 and CY 23/26 cm³ engines.

€16.90*

6432/01 FG Steel pinion 18 teeth 2-speed - 1pce.

Item N° 6432/01 Steel pinion 18 teeth 2-speed - 1pce.For combination with 46T main spur gear on 2-speed spur gear only.Diameter 29.7 mmBore 10 mmTotal width 16 mmTooth width 9.5 mmModule: m=1,5

€33.90*

6438/05 FG Tire insert for slicks 80 mm 1/6

Genuine FG spare/option part.Fits for 1/6 scale slick tires. Dimensions:Length: 380 mmWidth: 73 mmHeight: 13 mmContents:2 pieces

€14.90*

6432/17 FG Steel gearwheel 17 teeth, profile displaced, 1 pce.

Item N° 6432/17 Steel gearwheel 17 teeth, profile displaced, 1 pce. True running steel pinion for minimized wear. Suitable for all FG cars except Formula 1. Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.

€33.90*

Details