Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

6432/17 FG Steel gearwheel 17 teeth, profile displaced, 1 pce.

Product information "6432/17 FG Steel gearwheel 17 teeth, profile displaced, 1 pce."

Item N° 6432/17
Steel gearwheel 17 teeth, profile displaced, 1 pce.



True running steel pinion for minimized wear.

Suitable for all FG cars except Formula 1.

Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

6432 FG Steel pinion 18 teeth - 1pce.
Item N° 6432 Steel pinion 18 teeth - 1pce.For combination with 46T main spur gear.Diameter 29,7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5

€35.00*

Average rating of 0 out of 5 stars

7318 FG Dowel screw set for clutch blocks Zenoah
Genuine FG spare/option part. Part is delivered in silver or black color from vendor!Content:2 pieces

€9.90*

Average rating of 0 out of 5 stars

5718 FG Tuning dowel screws clutch blocks for Chung Yang
Genuine FG spare/option part.High-strength, coated dowel screws to fix the clutch blocks. Suitable for the standard clutch blocks and the Tuning clutch blocks.Contents:2 pieces

€6.90*

Average rating of 0 out of 5 stars

9539/06 FG Brake pads, 2 pce.
Genuine FG spare/option part.Replacement part for Mecatech Expert and Cross Hydro.

€30.00*

Average rating of 0 out of 5 stars

9538/09 FG Brake rotors, 2 pcs.
Item N° 9538/09Brake rotors, 2 pcs.Replacement part for MecaTech twin piston hydraulic brake.Measures:Diameter 64 mmThickness 1.9 mm18 mm square

€37.80*

Average rating of 0 out of 5 stars

y1423 Engine flange for engine quick mount, G320 version available for FG 1/5 models
y1423 Version: y1423/02 for Zenoah G320
Genuine HT spare/option part. For fitment on additional engines or as a spare part for engine quick mount y1421. The engine flange is available in two versions:y1423/01 for all Zenoah and Chung Yang engines up to 30 cm³ with standard bolt pattern 50 x 36 mmy1423/02 for Zenoah G320 - For installation of a Zenoah G320 in a FG Evo (Model range from 2004 till 2014). Fits the standard quick mount.When mounting the motor flange the bolts/nuts must be tightened together in small steps. To mount the studs from y1421/01 or the screws from y1421/02 the use of thread locking compound (link) is required.Please note: y1423/01 does not fit in combination with Zenoah OEM clutch!

€39.95*

Similar products

Average rating of 0 out of 5 stars

6431 FG Steel pinion 16 teeth
Genuine FG spare/option part.For combination with 48T main and differential spur gear.Diameter: 26.7 mmBore: 10 mmTotal width: 16 mmTooth width: 9.5 mmModule: m=1,5Contents:1 piece

€26.90*

Average rating of 0 out of 5 stars

6427 FG Plastic gear wheel 46 teeth - 1pce.
46 teeth gear wheel for the layshaft.Diameter 72 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5

€17.90*

Average rating of 0 out of 5 stars

6432 FG Steel pinion 18 teeth - 1pce.
Item N° 6432 Steel pinion 18 teeth - 1pce.For combination with 46T main spur gear.Diameter 29,7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5

€35.00*

Average rating of 0 out of 5 stars

6431/01 FG Steel pinion 16 teeth, wide - 1pce.
Item N° 6431/01 Steel pinion 16 teeth, wide - 1pce.For use on the clutch bell of FG monster cars.Diameter 26.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5

€33.90*

Average rating of 0 out of 5 stars

6425/01 FG Stabilizer front/rear for 1/6 scale models
Genuine FG spare/option part.Fits for all 1:6 scale models except Monster-Truck, Monster Beetle Pro and Stadium-Truck. Not suitable for all 4WD cars.Dimensions:Front: 3 mmRear: 4 mmContents:1 set

€37.00*

Average rating of 0 out of 5 stars

6441 FG Filter oil for foam filter 50ml
Genuine FG spare/option part. For use with all foam filters, not for fabric filters.Content1 piece

Content: 50 Milliliter (€198.00* / 1000 Milliliter)

€9.90*

Average rating of 0 out of 5 stars

6433 FG Steel pinion 20 teeth - 1pce.
Item N° 6433 Steel pinion 20 teeth - 1pce.For combination with 44T main spur gear.Diameter 32.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5

€35.90*

Average rating of 0 out of 5 stars

6429/01 FG Upright front for 1:6 2WD models
Genuine FG spare/option part.Reinforced version with steel inlay to prevent the M5 bolts from being pulled out.Bearing seats: 22 x 7 mm.Contents:2 pieces

€39.90*

Average rating of 0 out of 5 stars

6432/01 FG Steel pinion 18 teeth 2-speed - 1pce.
Item N° 6432/01 Steel pinion 18 teeth 2-speed - 1pce.For combination with 46T main spur gear on 2-speed spur gear only.Diameter 29.7 mmBore 10 mmTotal width 16 mmTooth width 9.5 mmModule: m=1,5

€35.00*

Average rating of 0 out of 5 stars

6456 FG Airfilter adapter with choke for Zenoah
Genuine FG spare/option part. As spare parts for engines that have no built-in choke.Fits Zenoah G230/G240/G270RC/G290/ZG22.Content:1 piece

€23.95*

Average rating of 0 out of 5 stars

6451/03 FG Air filter adapter for Zenoah and CY, 1 pce.
Item N° 6451/03 Air filter adapter for Zenoah and CY, 1pce.These air filter adapters are needed fpr mounting the FG air and inlet silencers 6464, 6465 and the K+N air filters 6442 and 6460 as well as 9462 and 6466 on Solo, Zenoah and Tech engines.Fits: Zenoah G230/G240/G260/G270/G290 and CY 23/26 cm³ engines.

€17.50*

Average rating of 0 out of 5 stars

6438/05 FG Tire insert for slicks 80 mm 1/6
Genuine FG spare/option part.Fits for 1/6 scale slick tires. Dimensions:Length: 380 mmWidth: 73 mmHeight: 13 mmContents:2 pieces

€14.90*

Customers also viewed

Average rating of 0 out of 5 stars

6432/01 FG Steel pinion 18 teeth 2-speed - 1pce.
Item N° 6432/01 Steel pinion 18 teeth 2-speed - 1pce.For combination with 46T main spur gear on 2-speed spur gear only.Diameter 29.7 mmBore 10 mmTotal width 16 mmTooth width 9.5 mmModule: m=1,5

€35.00*

Average rating of 0 out of 5 stars

7438 FG Alloy gear carrier 47mm - 1 pce.
Suitable for .For 10 mm diameter shafts.

€41.30*

Average rating of 0 out of 5 stars

y0704 Smartech Monster Truck body shell, painted, 1 pce.
Painted body shell with decals.Die Karosserie passt auch auf Carson Comanche, Carson Stadium Racer, Stadium Truck, Bigfoot Race und Pickup Truck. Bei individueller Anpassung natürlich an nahezu allen 1:6er und auch vielen 1:8er RC-Cars!Measures:Wheelbase: 400 mmWith between the wheels: approx. 255 mmWith in the middle: approx. 235 mmWidth: ca. 250 mmTotal length: ca. 630 mmHeight: ca. 180 mm

€49.90*

Average rating of 0 out of 5 stars

67235/01 FG Alloy rear axle mount left Leopard, 1 pce.
Genuine FG spare/option part.Spare part for the Leopard 2010 version.

€148.50*

Average rating of 0 out of 5 stars

y0190/46 HT-Alloy carrier with steel spur gear 46T for the layshaft
This carriers makes it possible to run steel spur gears on the layshaft. Pebbles heat and the high torque of monster truck applications are no longer a problem.The carrier is designed for reverse installation as seen on the FG EVO car, where the hubs of the pinion and the spur gear carrier are pointing to the outside of the car. The carrier features M8 (eight, no typo) grub screws for installation on the layshaft. This means that the tip of the screw is as wide as the flat area on the shaft and ensures best possible load distribution.

€89.90*

Average rating of 0 out of 5 stars

500405110 Carson Pinion gear 15 teeth
Genuine Carson spare/option part. Fits CY-Eline models.Contents:1 piece

€22.90*

Average rating of 0 out of 5 stars

6432/02 FG Steel pinion 19 teeth - 1pce.
Item N° 6432/02 Steel pinion 19 teeth - 1pce.For combination with 44T main spur gear.Diameter 32.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.

€35.00*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Plugin Development