Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

6031/01 FG Roll cage, for electro models

Product information "6031/01 FG Roll cage, for electro models"

Genuine FG spare/option part.

Fits all electric Off-Road cars from FG.

Contents:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

6022/01 FG Flexible antenna with mount
Genuine FG spare/option part. FG antenna tube with mount.Tube measures:Inner diameter: 2,2 mmOutside diameter: 4 mmLength: 190 mmContents:1 piece

€7.50*

Average rating of 0 out of 5 stars

y0663 Sanyo eneloop XX receiver battery 2500 mAh NiMh, 1 pce.
y0663 Connector: y0663/04 High current connector+ 5.3EUR
Item N° y0663Sanyo eneloop XX receiver battery 2500 mAh NiMh, 1 pce.Informations about eneloop cells:eneloop XXThe Sanyo eneloop cell eliminates the annoying problem that a charged battery has often lost a high percentage of its storage capacity after just one week. Also, the differences between individual cells in a pack are sometimes significant, reducing the life and performance of the complete pack. Compared to "normal" NiMh cells the Sanyo eneloop cell has a slightly lower capacity and a slightly higher price (in relationship to its capacity), but you get significant advantages in return. With the recently available improved version of the 2005 introduced and widely acclaimed eneloop cell self-discharge for rc-car related time frames is now more or less nonexistent. One could easily charge the cells at New Year?s Eve and use them at Christmas without noticing a significant loss of capacity. Sanyo eneloop cells show a considerably reduced tendency to failure of individual cells in a battery pack. Even after years eneloop cells usually differ by only a few percent. The voltage of the cells is also slightly higher than with normal NiMh cells, so that more volts are available under load. Especially when used in largescale cars with their usually extremely strong servos, this is a particularly important feature! Chargers which are suitable for NiMh cells will also work for eneloop cells. UniversalFGBECHigh currentThe basic features of the eneloop XX version are similar to the standard version, but here the priorities were set slightly different. At the expense of reduced (but easy to cope with for rc-car usage) values for load cycles and self-discharge, capacity could be increased by 25%.- Nominal capacity: 2500 mAh- Maximum number of charge cycles: 500- For cars with up to 3 servos- self-discharge: 25% at 1 yearYou can differentiate the two generations of eneloop cells by checking the model name which is written on each eneloop. The "old" cells have written HR-3UTG (AA) on them, the improved eneloop instead HR-3UTGA (AA)!

Variants from €39.90*
€45.20*

Average rating of 0 out of 5 stars

6051 FG Dampening rubber
Genuine FG spare/option part. Rubber pucks for all standard design FG spur gear carriers.Dimensions:Outside diameter: 16 mmInner diameter: 7 mmHeight: 6 mmContents:4 pieces

€8.90*

Average rating of 0 out of 5 stars

6268 FG Battery holder - 1pce.

€13.90*

Average rating of 0 out of 5 stars

5014/07 FG Battery holder long
Genuine FG spare/option part. Suitable for all FG touring car und Race-Truck models with long wheel base.Dimensions:Total length: 255 mmMounting bolt distance: 220 - 240 mmContent:1 piece

€15.90*

Average rating of 0 out of 5 stars

5014/05 FG Bolt for battery holder
Genuine FG spare/option part.Plastic bolt for battery holder.Contents:2 pieces

€5.90*

Similar products

Average rating of 0 out of 5 stars

6038 FG Engine mount washers for M4 and M4 screws
Genuine FG spare/option part. Washers for the screws (M4 / M5) that hold the engine mounts to the chassis. Suitable for all FG models.Dimensions:Outside diameter: 15 mmInside diameter: 6 mmContents:4 pieces

€6.50*

Average rating of 0 out of 5 stars

6029/08 FG Ball-and-socket joint for M8
Genuine FG spare/option part. Reinforced plastic ball-and-socket joints for M8 thread rods. Replacement for the plastic ball-and-socket joints 6029/01.Fits 10 mm balls, total length 39 mm.Contents:4 pieces

€12.90*

Average rating of 0 out of 5 stars

6051 FG Dampening rubber
Genuine FG spare/option part. Rubber pucks for all standard design FG spur gear carriers.Dimensions:Outside diameter: 16 mmInner diameter: 7 mmHeight: 6 mmContents:4 pieces

€8.90*

Average rating of 0 out of 5 stars

6041 FG Steel layshaft 10 mm
Genuine FG spare/option part. For all FG models except Formula 1.Dimensions:Length: 103 mmDiameter: 10 mmImportant:When installed in a Carson / Smartech model the brake hub is fastened with a screw stomach.Content:1 piece

€21.90*

Average rating of 0 out of 5 stars

6029/07 FG Ball-and-socket joint for M6
Genuine FG spare/option part. Reinforced plastic ball-and-socket joints for M6 thread rods. Replacement for the plastic ball-and-socket joints 6029.Fits 10 mm balls, total length 39 mm.Contents:4 pieces

€12.90*

Average rating of 0 out of 5 stars

6028/01 FG Track rod left/right 74mm for 1:6 models
Genuine FG spare/option part. Fits all FG 1/6 off road cars, alloy version.Length of threaded section approx. 17 mm.Contents:2 pieces

€13.90*

Average rating of 0 out of 5 stars

6050 FG Plastic gear carrier 60 mm
Genuine FG spare/option part. Plastic version, 60 mm diameter. For 48T - 46T spur gears.Also available in aluminum .Content:1 piece

€12.50*

Average rating of 0 out of 5 stars

6045/01 FG Brake shaft 97 with brake lever
Genuine FG spare/option part. For single disc brake only.Measures:Length: 91 mmDiameter: 6 mmThread: M3Contents:1 set

€13.90*

Average rating of 0 out of 5 stars

6030 FG Steel ball 10x10,75 mm
Genuine FG spare/option part. Steel ball with 4 mm bore.Contents:4 pieces

€12.90*

Average rating of 0 out of 5 stars

6034/01 FG Plastic part for stiffening brace
Genuine FG spare/option part. Necessary for installation of 6034.Dimensions:Length: 35 mmDiameter thicker part: 10 mmDiameter thin part: 76 mmThread: M4Contents:2 pieces

€4.90*

Average rating of 0 out of 5 stars

6029/04 Ball-and-socket joint 10mm for M6 adjustable - 4pcs.
Plastic socket for 10mm balls, fits M6 rods, adjustable.For all FG cars.

€12.90*

Average rating of 0 out of 5 stars

6037/01 FG Steel mounting plate - 2pcs.
Item N° 6037/01 Steel mounting plate - 2pcs.Connects the large engine mount to the engine flange on all FG cars except evo 04 / evo 07 / competition 07Bulk:large extent plate:length: 35 mmwidth: 10 mmheight: 2 mmsmall extent plate:length: 25 mmwidth: 10 mmheight: 2 mm

€8.90*

Customers also viewed

Average rating of 0 out of 5 stars

67244 FG Roll cage short for Leopard 2WD/4WD
Genuine FG spare/option part. Content:1 piece

€15.70*

Average rating of 0 out of 5 stars

60238 FG Spark plug protection
Genuine spare/option part.Spare part for FG Off-Road Buggy for 2WD and 4WD.Contents:1 piece

€11.50*

Average rating of 0 out of 5 stars

GPM 9471 Ball drive conversion kit for FG and Mecatech touring cars and gt-models
FG Set price: 130,20 EURFits all FG touring cars, GT-models and Mecatech FW01.The ball drive conversion kit for FG marder, Off-Road Buggy, beetle, monster / stadium, formula 1 and truck models you will find under GPM 9472. The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins.The GPM ball drive set includes everything for a conversion of the respective FG/Mecatech cars. Set includes:Quantity:DescriptionPart number2 piecesBall drive wheel shaftGPM 6079/012 piecesDifferential ball drive cupGPM 6069/022 piecesBall drive shaft 91 mmGPM 7081/014 piecesDrive shaft booty100412 piecesSteel ballGPM 7080/024 piecesDrive shaft spacer springy1218

€149.90*

Average rating of 0 out of 5 stars

60239 FG Plastic brace, 2 pcs.
Item N° 60239 Plastic brace, 2 pcs.Spare part for FG Off-Road Buggy for 2WD and 4WD.

€13.90*

Average rating of 0 out of 5 stars

670000 FG Leo Competition 2020 2WD
The new off-road flagship from FG. The Leopard Competition 2020, made of high-quality aluminium and carbon fibre components, is the winner of the first French championship, showing directly what this vehicle is capable of. The model comes with a 26cc engine, a central hydraulic brake, wheels and unpainted clear body. This buggy combines high performance with top driving characteristics and maximum reliability.The complete radio system and the servos (RTR!) are required for operation.The complete RTR equipment can be selected in our online shop options menu for a surcharge.The new benchmark for 2WD competition buggiesNew extended chassis with 580 mm wheelbaseMilled front chassis part to improve mass distributionSide chassis stiffeners made of T7075 alloy Newly developed tuned pipe systemNewly developed and weight-saving radio plateWinner of the first racing series of the French championshipDimensions:Length: 780 mm Width: 470 mmHeight: 330 mmWheelbase: 580 mmWeight: 10 kg

€2,599.95*

Average rating of 0 out of 5 stars

6032 FG Brace for roll cage long/short
Genuine FG spare/option part. One each long and short, you need two sets for a complete cage.Fits FG Marder, Beetle, Monster Truck, Monster Jeep, Stadium Jeep, Stadium Truck.Size Large strut:Length: 140 mmDiameter: 10 mmThread: M5Size smal strut:Length: 76 mmDiameter: 10 mmThread: M4Contents:2 pieces

€15.50*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Plugin Development