4532 FG Titanium pushrod turnbuckle left/right M6x89 mm

€49.50*

Prices incl. VAT plus shipping costs

Available

Product number: fg_4532

Product information "4532 FG Titanium pushrod turnbuckle left/right M6x89 mm"

Genuine FG spare/option part.

Corrosion resistant and 40 % less weight compared to steel.

Inhalt:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Kunden haben auch gesehen

4531/07 FG Titanium wishbone turnbuckle left/right M7x73mm - 2pcs.

Corrosion resistant and 40 % less weight compared to steel.

€45.90*

HT-Steel pinion for Carson / Smartech 4WD cars

Genuine HT spare/option part. Nitrited steel gears, fit Carson Gas Devil / Smartech Thunderbolt 4x4 only.These gears are available with 37T or 40T, both share the same diameter and must be used in combination.Please note: the gears cannot be used in combination with the stock gears and the 37T version is no replacement for the stock 37T gear!This gives you the following new gear ratios:I=10.58I=9.79 (when using two identical gears !)I=9.06The stock gear ratio is I=11.38 and I=8.42 is possible by switching the gears.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.Contents:1 piece

€44.90*

10032 FG Front upright - 2pcs.

€35.90*

Z950 HPI Cross wrench small

Genuine HPI spare/option part. Content:1 piece

€4.38*

Tamiya Lexan spray paint

TAMIYA PS = Polycarbonate spray paints are specially developed for painting unpainted kit body shells. Numerous colour shades are available and allow the individual design of models. Each can contains 100 ml of highly opaque paint, which is oil and fuel resistant, allowing the use on nitro models.The body shell should be degreased and cleaned before use. Best painting results are achieved when thin layers of paint are sprayed on from a distance of approx. 30 cm. Between two spraying processes the paint should dry slightly to avoid "tears".Always follow the painting instructions of models and on the can. Danger warnings: H222 Extremely flammable aerosol. H229 Container is under pressure: may burst when heated. H315 Causes skin irritation. H318 Causes severe eye damage. H335 May cause respiratory irritation. H336 May cause drowsiness and dizziness. EUH066 Repeated exposure may cause skin dryness or cracking. Content: 100 ml spray can with spray headPainting tips:

Content: 100 Milliliter (€97.90* / 1000 Milliliter)

Variants from €9.01*

€9.79*

TT1042/01 Top Tuning Super Baja Rey 2.0 / Rock Rey front light bar lens

Genuine Top Tuning spare/option part.Lens for the Losi Super Baja Rey 2.0 front light bar. It protects the LED strip against dirt.The stock mounting screws from the LED strip will be re-used.Contents:1 piece

€8.90*