4425 FG Threaded rod M4x80 mm

€5.90*

Available

Product number: fg_4425

EAN: 3410569680372

Product information "4425 FG Threaded rod M4x80 mm"

Genuine FG spare/option part.

Multipurpose M4 threaded. For track rods, steering rods a.s.o. According to the application cutting may be required.

Contents:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

4429/01 FG Steel balljoint Ø5/M8

Genuine FG spare/option part.Steel ball-and-socket joint with 5mm bore in the ball and M8 right-hand thread for installation on the wishbones.Delivery contains all needed pin disks.Dimensions:A = 5 mmB = M8C = 8 mmD = 16 mmE = 37.5 mmContent:2 pieces

€57.10*

4429/02 FG Steel taper disk 5mm bore

Genuine FG spare/option part.Steel taper disks, 3.5 mm thick, with a higher stiffness compared to alloy taper disks. Installation of these disks allows for larger operation angles of the metal ball joints and rose joints. You need two disks per joint.Contents:4 pieces

€10.95*

4436 FG Special balljoint Ø4/M4

Genuine FG spare/option part. IGUS plastic high-precision ball-and-socket joint with 3mm bore and M4 right-handed thread. To use with stabilizers and steering rods.Contents:2 pieces

€29.90*

4429 FG Steel balljoint

Genuine FG spare/option part. Steel ball-and-socket-joint with 5mm bore in the ball and M6 right-handed thread for use with the wishbones. For the installation are needed the adjusting screws 4430 or 4431. The delivery contains all needed pin disks. Dimensions:A = 5 mmB = M6C = 8 mmD = 15.5 mmE = 37 mmContents:2 pieces

€42.30*

4437 FG Alloy balljoint Ø5/M8 - 2pcs.

Alloy ball-and-socket joint with 5mm bore in the ball and M8 right-hand thread for use with wishbones.When using these ball joints you will get a weight reduction in comparison with,A = 5 mmB = M8C = 8 mmD = 17.5 mmE = 39 mm

€84.70*

4419 FG adjustable 3-shoe clutch for Evo 2020

Genuine FG spare/option part.Content:1 piece

€149.95*

Details

4426 FG Threaded rod M4x100 mm

Genuine FG spare/option part. Multipurpose M4 threaded. For track rods, steering rods a.s.o. According to the application cutting may be required.Contents:2 pieces

€5.90*

4437/01 FG Alum.ball-and-socket joint Ø5/M6, 2 pcs.

Genuine FG spare/option part.Strong, maintenance-free and backlash-free precision ball joints made of aluminum. Ball with 5mm bore and body with M6 r/h female thread. For use with the adjustable upper aluminum and plastic wishbones at front and rear suspension.Comes with the required conical spacers included.

€86.90*

4428 FG Steel balljoint Ø4/M4

Genuine FG spare/option part. Steel ball joint with 4mm bore (ball) and M4 right-threaded conncetion. Suitable for front adjustable ball stabilizers 8517 and rear ball stabilizers 8516, F1 stabilizers, steering rods a.s.o., also suitable for other makes. Dimensions:A = 4 mmB = M4C = 7 mmD = 14 mmE = 31 mmContent:2 pieces

€39.95*

4421/05 FG Torx screw driver

Genuine FG spare/option part.Adjusting screw driver for FG 4422.Contents:1 piece

€7.40*

4437/02 FG Ball connector

Genuine FG spare/option part. Content:2 pieces

€79.00*

Details

4435 FG Special ball joint Ø3 / M4

€25.90*

Customers also viewed

y1309 All steel linkage for steering servo/servo saver application

Genuine HT spare/option part.Very strong linkage with M6 steel ball joints.M6 threaded rod with lock nuts, balls with holes for M4 screws.Maximum length about 96 mm, but through cutting the M6 rod allows for a minimum length of 48 mm.Significantly stronger than the standard plastic version, and especially recommend when using the Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP servo, this linkage can be used with "normal" servos as well.The threaded rod is not designed as a turnbuckle for a reason because there is not need to change the adjusted length for this application after installation. The setting accuracy of 0.5 mm (½ turn) means a maximum difference to the ideal length of 0.25 mm. This is always sufficient, the trim on the transmitter handles the final adjustment.On the other hand, a connecting rod with the same thread on both ends will always keep its setting when installed, even when both lock nuts are not tightened against the ball joints. Therefore reliability is higher.Set includes:2 x steel ball joints M62 x flat lock nuts1 x M6 x 60 mm threaded piece for Losi 5ive-T1 x M6 x 80 mm threaded piece for Losi 5ive-T 2.02 x spacer tubesContents:1 piece

€27.90*