4415/06 FG Clutch spring

€4.30*

Prices incl. VAT plus shipping costs

Available

Product number: fg_4415_06

EAN: 3410569680105

Product information "4415/06 FG Clutch spring"

Genuine FG spare/option part.

Contents:

3 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Similar products

4429/02 FG Steel taper disk 5mm bore

Genuine FG spare/option part.Steel taper disks, 3.5 mm thick, with a higher stiffness compared to alloy taper disks. Installation of these disks allows for larger operation angles of the metal ball joints and rose joints. You need two disks per joint.Contents:4 pieces

€10.95*

4428 FG Steel balljoint Ø4/M4

Genuine FG spare/option part. Steel ball joint with 4mm bore (ball) and M4 right-threaded conncetion. Suitable for front adjustable ball stabilizers 8517 and rear ball stabilizers 8516, F1 stabilizers, steering rods a.s.o., also suitable for other makes. Dimensions:A = 4 mmB = M4C = 7 mmD = 14 mmE = 31 mmContent:2 pieces

€39.95*

4426 FG Threaded rod M4x100 mm

Genuine FG spare/option part. Multipurpose M4 threaded. For track rods, steering rods a.s.o. According to the application cutting may be required.Contents:2 pieces

€5.90*

4437/01 FG Alum.ball-and-socket joint Ø5/M6, 2 pcs.

Genuine FG spare/option part.Strong, maintenance-free and backlash-free precision ball joints made of aluminum. Ball with 5mm bore and body with M6 r/h female thread. For use with the adjustable upper aluminum and plastic wishbones at front and rear suspension.Comes with the required conical spacers included.

€86.90*

4429/01 FG Steel balljoint Ø5/M8

Genuine FG spare/option part.Steel ball-and-socket joint with 5mm bore in the ball and M8 right-hand thread for installation on the wishbones.Delivery contains all needed pin disks.Dimensions:A = 5 mmB = M8C = 8 mmD = 16 mmE = 37.5 mmContent:2 pieces

€57.10*

4429 FG Steel balljoint

Genuine FG spare/option part. Steel ball-and-socket-joint with 5mm bore in the ball and M6 right-handed thread for use with the wishbones. For the installation are needed the adjusting screws 4430 or 4431. The delivery contains all needed pin disks. Dimensions:A = 5 mmB = M6C = 8 mmD = 15.5 mmE = 37 mmContents:2 pieces

€42.30*

4437 FG Alloy balljoint Ø5/M8 - 2pcs.

Alloy ball-and-socket joint with 5mm bore in the ball and M8 right-hand thread for use with wishbones.When using these ball joints you will get a weight reduction in comparison with,A = 5 mmB = M8C = 8 mmD = 17.5 mmE = 39 mm

€84.70*

4415/07 FG Spring guide

Genuine FG spare/option part. Contents:3 pieces

€5.60*

4420/08 FG Clutch adjustment disk

Genuine FG spare/option part. Spare part for 4420.Content:1 Piece

€22.60*

4422/02 FG Clutch set collar for F1 and Solo

Genuine FG spare/option part. Spare part for 4422. Contents:1 piece

€17.80*

4419 FG adjustable 3-shoe clutch for Evo 2020

Genuine FG spare/option part.Content:1 piece

€149.95*

4418 FG 3-block clutch adjustable

Genuine FG spare/option part.Contents:1 piece

€189.95*

Customers also viewed

y0730/19 Full-aluminum clutch shoes conversion kit

Genuine GPM spare/option part. Full aluminum clutch shoes are very successfully used in 1/5 onroad racing applications.Therefore we can now offer the GPM conversion kit for BigScale Cross/Race clutches to full-aluminum clutch shoes. Made of a special alloy to suit this application the kit comes with 1.4 mm wire diameter springs and new spring pressure plates.Slight aluminum deposits in the clutch bell and corresponding wear marks in the clutch shoes are normal with the Big Scale ALLOY clutch and have no negative effect on the function. Caution: It is very important that when swapping the full-aluminum clutch shoes against the organic friction pads of a Big Scale CROSS or RACE to use a different or new , because the rough surface of the aluminum deposits in the clutch bell left by the Big Scale ALLOY will cause a high wear on the organic pads.y0730y0731Content:1 set

€54.90*

154200EB FG Sportsline 4WD Electro 510er Wheelbase, Basic, BLACK TUNED EDITION

Genuine FG spare/option part. The following items are required for completion: electric motor, ESC, steering servo, radio system, body mounts, body, LiPo driving batteries and charger. Incl. Edition-Ausstattung

€799.95*