2012-231 Mecatech Alloy front Axle mount RH

€86.00*

Prices incl. VAT plus shipping costs

No longer available

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Product number: mec_2012_231

EAN: 4058575110798

Product information "2012-231 Mecatech Alloy front Axle mount RH"

Genuine Mecatech spare/option part for the FW01.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

2012-219 Mecatech Rear plastic column support (for Porsche bodyshell)

Genuine Mecatech spare/option part for the FW01.Contents:1 piece

€14.70*

Details

2012-223 Mecatech Clutch pinion 34 teeth

Genuine Mecatech spare/option part for the FW01.Contents:1 piece

€33.00*

Details

2012-233 Mecatech Carbon fieber front Mount plate 2017

Genuine Mecatech spare/option part for the FW01.Contents:1 piece

€26.10*

2012-236 Mecatech Alloy plastic spacer for connection triangle 2017

Genuine Mecatech spare/option part for the FW01.Contents:1 set

€7.50*

2012-218 Mecatech Rear Carbon body support (for Porsche bodyshell)

Genuine Mecatech spare/option part for the FW01.Contents:1 piece

€20.90*

2012-240 Mecatech Servo Saver adjustment nut

Genuine Mecatech spare/option part for the FW01.Contents:1 piece

€12.00*

2012-221 Mecatech Lower sway bar mount LH

Genuine Mecatech spare/option part. Contents:1 piece

€22.60*

2012-222 Mecatech Lower roll bar mount RH

Genuine Mecatech spare/option part. Contents:1 piece

€22.90*

2012-228 Mecatech Complete servo saver 2017

Genuine Mecatech spare/option part for the FW01.Contents:1 piece

€159.00*

This product is currently not available.

2012-227 Rear anti-roll bar

Genuine Mecatech spare/option part for the FW01.Fits all versions from Mecatech FW01.Contents:1 piece

€174.00*

Details

2012-212 Mecatech Grooves chassis FW01

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€290.50*

Details

2012-226 Mecatech Central weight for Short car

Genuine Mecatech spare/option part for the FW01.Attention:does only fit the chassis plate with corresponding cut-outs and mounting provision!Content:2 pieces

€37.40*

Details

Customers also viewed

10530 FG 4-block clutch 05 adjustable, used "5"

Reliable and approved 4-block clutch with teflon linings, adjustable. The well approved clutch was reworked in some details. This clutch is excellent for the use in Off-Road models and is distinguised through reliability and low wear.-used.See photos for condition and delivery.Adjustable and in many details improved 4-block clutch.This clutch is suitable for all FG models and other brands with Zenoah or CY engines.Not suitable for HPI cars.

€25.00*

2012-283 Mecatech Chassis short

€287.00*

Details

y2012-32/04 Mecatech Lager 8x19x6, set of 4

Genuine HT spare/option part for the FW01.Wheel bearings front and rear, sealed on both sides.Content:1 Set

€14.90*

2012-60 Mecatech Pillar Front Axle RH

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€86.00*

This product is no longer available.

y2007/BLS Digital Big Scale Brushless Servo BLS9130, high quality

The brushless Big Scale servo is an extremely robust digital servo, with a high performance brushless motor, in absolute premium quality, with a full aluminum case for optimal heat dissipation in the 2-version with elaborate cooling fins, metal gears and equipped with high-quality 30 cm long silicone insulated cable. Where with other high-performance servos you still have to buy an aluminum top or case as third party options, the brushless Big Scale servo already comes with a full metal case, and above all, the aluminum to features special bushings for the intermediate shafts! Of course, the support from a metal top cover guarantees a much longer service life of the complete gearbox, than with a plastic version! Defective gears are known to be the most frequent cause of failure; especially for highly stressed servos in 1/5 and 1/6 cars! The brushless Big Scale servo is also the first choice for 1/8 and 1/10 race cars, where fast reaction times and high steering forces bring up the demand for an extremely fast and reliable servo! Also, servo mounting tab breakage on the servo cover is virtually impossible with the brushless Big Scale servo. Dimensions:Length: 40 mmWidth: 20 mmHeight: 41.4 mmWeight: 72 gramsPerformance:7.4 V6 VHolding torque kg-cm/oz-in30.0/41726,0/361Speed sec./60°0.110.14Accessories included:Three different plastic servo horns / discFour each rubber grommets and guide sleevesMounting screwsNote: Due to the extreme holding power of the brushless Big Scale servo the rubber grommets should always be installed in combination with the guide sleeves. The brushless Big Scale servo comes with accessories in a high quality plastic case with molded insert.We recommend an aluminum servo arm from the selection of the article:Alloy servoarms, for 25 teeth multi-tooth shaft 9,90 EUR

€109.90*

Mecatech FW01 Touring car, wheelbase 510 mm, Basic Kit -- Europe- and world champion

The Mecatech FW01 is for sure the currently most innovative 1/5 race car designed for the dedicated and technically enthusiastic rc car driver.Everyone is enthusiastic about the perfectly fitting and precise workmanship at the highest level. Only high quality materials are used for the production.Since many years Mecatech is a well-know premium manufacturer of largescale hydraulic brakes or shocks and, as only a few may know, a technology expert for a number of Formula 1 racing teams!The Basic Kit of the FW01 is especially intended for "switchers" and differs from the chassis kit in terms of the brakes and shock absorbers (included in the chassis kit). Here is a list of the parts that are required for completion:brakes, shocks and springs (Difference to Chassis Kit)DifferentialEngine Clutch, Airbox and tuned pipe systembody shell and tiresElectonic components such as servos, batteries and Remote controlStock gearing:Clutch pinion / spur gear: 36T / 64TLayshaft pinion / differential: 24T / 73TCurrently the Mecatech FW01 is for sure the benchmark of the 1/5 scale racing scene! In the first year Markus Feldmann won with his FW01 1: 5 Mecatech on one of the world's finest and most demanding race track in Lostallo / SwitzerlandMecatech is multiple German, European and World Champion with the FW01 and as the last result:Markus Feldman wins the European Championship in Tourlaville/France. All top 5 positions went to drivers running a Mecatech FW01. 7 out of 10 finalists cars were Mecatech FW01.Although the fit of the Mecatech FW01 parts makes the assembly of the car a great experience, some of our customers want to use the expertise of our shop and wish their FW01 fully assembled and tuned in by us!The complete assembly of your FW01 by our workshop is possible for an additional charge. Please note that the costs of the full assembly with servos a.s.o. do not include the price of any rc-components. If you do not have a suitable radio system with servos and batteries as well as switch and charger, you have to take an additional EUR 800 to EUR 1,500 for this equipment into account. We will be happy to make you an appropriate offer. We are currently waiting for the latest version of the Mecatech FW01.Included in the basic kit:- All pinions- clutch bell- Coupling fixation- All parts and screws for mounting the engineDoes not include- Brakes, shocks and springs- differential- clutch- body and spoilers- Airbox- Engine and linkage- Electronics- Tires

€1,862.00*