Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

1056 FG Competition chassis long Evo 07 - 1pce.

Product information "1056 FG Competition chassis long Evo 07 - 1pce."

Only suitable for the Evo 04 - Evo 08, 530/535 mm wheelbase.
8mm CNC machined alloy chassis.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also viewed

Average rating of 0 out of 5 stars

2012-283 Mecatech Chassis short

€287.00*

Average rating of 0 out of 5 stars

3071 FG Body underpart MAN-Truck SPARE PART- 1pce.
Contains only the bottom part. If you need a complete body we advise .The bottom part is delivered not painted!

€149.90*

Average rating of 0 out of 5 stars

1057/01 FG Competition chassis plate, long EVO 09 - 530/535 mm, 1 pce.
The latest FG EVO alloy chassis with longitudinal grooves at the bottom. This reduces the contact patch of the chassis when touching the ground. The reduced tendency for rubber pickup results in lower loss of speed when the suspension bottoms out.Siince the overall length of the plate was reduced to 670 mm, is needed to install the rear body support. The chassis plate weighs 925 grams.Please note that the rear wing support from all previous EVO cars until 08 cannot be used with this chassis plate.

€324.95*

Average rating of 0 out of 5 stars

9460 FG inlet silencer for Solo - set
Flat version for models with flat bodies as Mercedes CLK-GTR, Porsche GT1, McLaren or Chrysler Viper. Only for Solo engines.

€38.70*

Average rating of 0 out of 5 stars

FG Sportsline 2WD-530 with Super Street Truck body and HT-Edition
Former: "Mercedes 1834" Truck.The Sportsline 08 quality at a reasonable price for beginners. The Sportsline series is ideal for car modellers whose main focus is not just the chassis, but rather the combination of chassis and body shell.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Technical description:The models are built on a 4mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in. Further equipment points are front disk brakes, differential gear, easy-running FG ball drive, alloy brake calliper with big brake disk, stabilizer bar front and rear, tuned pipe muffler, Evo gas tank, rear brace, 20T steel pinion, spark plug cap suppression cover, latest version (Evo) oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings. The models are equipped with a powerful 23 cm³ combustion engine. The engine needs a 2-stroke petrol oil mixture. One tank filling gives you about 45 minutes driving fun. The power is transmitted over the well-tried system: from the engine over the 2-block clutch over radial tooth wheels on to the rear axle which is equipped with the bevel differential gear with pluggable axles. RC-plate with receiver box.HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount bigCNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant. They come with all necessary hardware included. Value: 64,95 EUR Alloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EUR Ball bearing set, sealed, set of 14The seal rings on sealed ball bearings keep dirt and dust out of the bearings. They are therefore particularly suitable for use in dirty and dusty environments.Value: 59,90 EURTotal value: 227,35 EURDimensions:Length: 880 mmWidth: 435 mmHeight: 380 mmWheelbase: 530 mmTrucks in action!

€1,349.95*

Average rating of 0 out of 5 stars

1083 FG Front axle shock mount for Evo 06 - 14
Genuine FG spare/option part.New flat carbon front connecting plate for Evo 06-14.

€87.90*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Plugin Development