Actual product may be of different color. We have no bearing on this since we are not the manufacturer.
Please note: It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:
Full set of gaskets for Zenoah G40, G270, G290, and 4-Bolt CY engines.Set includes:0.4 mm cylinder gasket (Zenoah stock thickness!)1 mm exhaust gasket0.5 mm crankcase gasket0.5 mm isolator gasket0.5 mm carburetor gasket
Especially for installation of all engine gaskets. Temperature resistant from -55 °C to +200 °C. Resistant to water, mineral oils, synthetic lubricants, fuels, organic solvents and refrigerants. info: Hand tight: 10 - 20 minReady to use: 1 - 3 hoursGap fill: 0.5 mmContent: 50 ml Notes for usage: This surface seal is not for use as the sole sealant, it should always be applied in combination with a paper gasket.The HT-surface sealing agent should be sparsely applied over the entire surface, with care being taken that the sealant does not enter the devices internals (e.g. crankcase, differential a.s.o.) during the assembly.
Bindulin liquid rubber - very high elasticitySuitable for additional sealing of tuned pipes and exhaust / manifold connections .Temperature resistant from -60 ° to + 180 ° CResistant against diluted acids.Also for sealing threaded joints, electric lines and cable lead-throughs in receiver boxes.The surfaces must be clean, grease free and dry (brake cleaner).Contents:1 piece / 45 grams
Marston Universal blue is the leading non-setting gasket and sealing compound in use world-wide. The product is used by many of the world?s major automotive manufacturers and by several Formula 1 teams.Features- Non hardening and non setting- Unlimited assembly time- Vibration resistant- Allows metal to metal contact- Resistant to combustion products, water, engine coolant, petroleum, lubricating oils, kerosene and fluorocarbon refrigerants- Seals surface imperfections- Withstands rapid variations in temperature80 ml tube
Genuine MD spare/option part. The red version with a temperature resistant up to 300°C. Directions for use:Clean the surfaces with a cleaner. Apply MD-Sil on one side and press the parts together. Touch-dry in 10 - 20 minutes. Curing speed 3 mm/24 hours. Contents:1 piece / 80 ml
Full set of gaskets for Zenoah G40, G270, G290, and 4-Bolt CY engines.Set includes:0.4 mm cylinder gasket (Zenoah stock thickness!)1 mm exhaust gasket0.5 mm crankcase gasket0.5 mm isolator gasket0.5 mm carburetor gasket
Genuine FG spare/option part.Applications:Click here!The gasket have a thickness from 0,40 mm. Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContents:1 piece
Big-Speed Automatic/On-Road with standard length clutch body, 1 x carbon shoes and 3 x aluminum shoes, 2.3 mm springs. Clutch engagement speed 9.500 / 10.400 / 11.300 rpm, for on-road cars.Fits all Carson/Smartech, FG except Formula 1 and Evo 2020, Losi 5ive-T and DBXL, HPI Baja and many more.The Tourex Adjustable 2 clutch is available in different versions, suitable for almost any 1/6 or 1/5 off-road and on-road cars! The universal version fits most off-road and on-road cars likeall Losi 5ive-T, Losi Mini and Losi DBXL all cars from the HPI Baja seriesall Carson / Smartech buggy, monster and C5 on-road carsall FG cars except Formula 1 and EVO 2020 Special versions are available for either FG Formula 1 / EVO 2020 and Mecatech cars, as these cars require a different length of the clutch body. For off-road applications (buggy or truck) Tourex Automatic clutches with an engagement speed of about 7,000 - 8,500 rpm are recommended! For 1/5 on-road applications you will usually run Tourex Automatic clutches with an engagement speed of about 8,500 or 10,800 rpm. The Tourex Automatic clutches are available in several configurations: Item no.:Clutch body:Friction material: Clutch spring:Engagement speed:TXLS510 Standard 4 x Carbon1,8 mm6.000 / 6.700 / 7.500 rpmTXLA510-L.Mix Standard 1 x Carbon, 3 x Alloy 2,0 mm6.000 / 6.700 / 7.500 rpmTXLA510-MIX Standard 1 x Carbon, 3 x Alloy 2,3 mm9.500 / 10.400 / 11.300 rpmTXLA510-MIX-MC Short 1 x Carbon, 3 x Alloy 2,3 mm9.500 / 10.400 / 11.300 rpmTXLA510-F1 Short 4 x Carbon 1,8 mm6.000 / 6.700 / 7.500 rpmTXLA510-F1-MIX Short 1 x Carbon, 3 x Alloy 2,3 mm9.500 / 10.400 / 11.300 rpm Original text of the manufacturer:TOUREX Big-Speed Adjustable 2, 4 shoe performance clutch, adjustable with triple adjustment As usual this clutch is available for all cars and categories and Tourex Standard materials like PTFE carbon with bronze mix and 7075 aluminum for the shoes have been used. To adjust engagement RPM lift the front plate of the clutch and rotate counter-clockwise to the next position. This is best done with the matching tool Item no.:Clutch body:Friction material: Clutch spring:Engagement speed:TXLS510 Standard 4 x Carbon1,8 mm6.000 / 6.700 / 7.500 rpmTXLA510-L.Mix Standard 1 x Carbon, 3 x Alloy 2,0 mm6.000 / 6.700 / 7.500 rpmTXLA510-MIX Standard 1 x Carbon, 3 x Alloy 2,3 mm9.500 / 10.400 / 11.300 rpmTXLA510-MIX-MC Short 1 x Carbon, 3 x Alloy 2,3 mm9.500 / 10.400 / 11.300 rpmTXLA510-F1 Short 4 x Carbon 1,8 mm6.000 / 6.700 / 7.500 rpmTXLA510-F1-MIX Short 1 x Carbon, 3 x Alloy 2,3 mm9.500 / 10.400 / 11.300 rpm Original text of the manufacturer:TOUREX Big-Speed Adjustable 2, 4 shoe performance clutch, adjustable with triple adjustment As usual this clutch is available for all cars and categories and Tourex Standard materials like PTFE carbon with bronze mix and 7075 aluminum for the shoes have been used. To adjust engagement RPM lift the front plate of the clutch and rotate counter-clockwise to the next position. This is best done with the matching tool TXLA903, which is also meant to hold the clutch when tightening and loosening the M6 screw in the crankshaft instead of using a piston stopper. With the 4-shoe construction there is the possibility to try the clutch with a wide variety of settings and find the best match for your application. In addition to the 3 settings it is possible with 2WD clutches with 4 carbon shoes to use different springs for a pair of opposing shoes. This allows for a 500 or 1000 RPM earlier engagement of two shoes, providing softer clutch action on slippery terrain.In addition, you can insert M4x5 grub screws in clutches with MIX shoes (3 x aluminum and 1 x carbon) into the appropriate threads in the aluminum shoes to raise their weight. 4 grub screws M4x5 can be inserted per aluminum shoe, 2 from the front and 2 from the rear. To keep the clutch in balance, always use the same quantity of grub screws and only at opposite positions. The clutch features an M8 thread in the center for easy removal from the crankshaft using an M8 screw (not included).Please check the list at the top to get the correct clutch for your application.Contents:1 piece