Complete universal set of screws, nuts and washers for all 1/5 and 1/6 scale FG vehicles (except Competition/Evo alloy models).The set includes a total of 309 screws, nuts and washers in different quantities.13 sizes of cap head screws8 sizes of CSH screws3 sizes of button head screws7 sizes of set screws6 sizes of washers3 sizes of self-locking nuts2 sizes of nuts9 sizes of self tapping screws3 sizes of CSH self tapping screws3 sizes of pan head screwsComes in a high quality 190x170x40 mm assortment box.Contents:Cap head screws in 12.9:3 piecesM3x82 piecesM3x161 piecesM3x183 piecesM3x209 piecesM4x202 piecesM4x252 piecesM4x301 piecesM4x451 piecesM5x162 piecesM5x251 piecesM6x103 piecesM6x401 piecesM6x75CSH screws in 10.9:2 piecesM4x162 piecesM4x258 piecesM4x401 piecesM5x142 piecesM5x256 piecesM5x302 piecesM5x351 piecesM6x16Button head screws in 10.9:10 piecesM4x82 piecesM4x142 piecesM5x40Grub screws:2 piecesM4x305 piecesM5x52 piecesM5x164 piecesM5x252 piecesM5x302 piecesM5x408 piecesM6x6Washers:2 piecesM3,2510 piecesM4,215 piecesM5,33 piecesM6,410 piecesM4,23 pieces10x16x1Self-locking nuts:3 piecesM316 piecesM410 piecesM5Normal nuts:8 piecesM54 piecesM5Sheet metal screws DIN 7981 Torx:7 piecesM2,9x9,52 piecesM2,9x131 piecesM2,9x192 piecesM2,9x226 piecesM4,2x9,59 piecesM4,2x1314 piecesM4,2x1614 piecesM4,2x225 piecesM4,2x32Countersunk head senk sheet metal screws DIN7982 Torx:14 piecesM4,2x1348 piecesM4,2x162 piecesM4,2x32Button head screws DIN 7985 Phillips (Kreuzschlitz) Verz. 4.8:4 piecesM3x41 piecesM3x252 piecesM4x14
CROSS BOND 170 x 80 mm and 170 x 60 mm tires mit MadMax Extreme 20 bolt-beadlock rims with 18 mm wheel square and reinforced beadlock rings were designed for use on loose surfaces. The extremely rigid and differently structured lugs of the CROSS BOND ensure optimum power transmission and also allow for excellent grip on loose surfaces, such as sand and soil. The lugs are raised at the treads outside, and therefore provide maximum grip, particularly when cornering where the tire is canted to the outside. Due to the extreme load created by the MadMax CROSS BOND tires the rim was optimized again with a reinforcement ring.The tires are fitted with a special rigid insert, which can handle the cornering forces and maintain the tires shape even on heavy cars. We recommend to check the beadlock screws after the run. Dimensions:Outer diameter: 170 mmFront tire width: 60 mmRear tire width: 80 mmReinforced 18 mm square wheel driveThe video shows the 18 mm square drive version. Also available with 24 mm hex. Some off-road tires knowledge can be found here!
Kit contents:1 pair each of mounted and glued Mammoth Supergrip Front H or M for the front and M or S for the rear.These combinations are recommended for the recreational driver. Glued on FG Leopard Race rims, fits all FG, Smartech, Carson and many other cars. Or for the ambitious driver:Choice of 2 pairs H = hard, M = medium, S = soft or super soft = SS!The softer the compound the more grip the tire will provide, but the harder the compound the longer the tire will last (as in the original Formula 1!) With the same compound for front and rear axle even a 4WD car requires better driving skills! As the saying goes: It turns better ;-) But chances are that you will also produce a more or less gallant spin out every now and then! Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable. It is known that any driver has his own preferred combination! The white lettering on the tires has been applied for presentation purpose only. The tires will be delivered with black sidewall. Measures:Width: 64 mmDiameter: 153 mmAlso suitable for:With the following wheel adapter: y1183 Rim adapterWith the following wheel adapter: y0786 Rim adapter