These Monster wheels have a bigger square depth, this reduces a cylindrical turning of the square wheel significantly. To mount this wheel you need a 14mm wide square wheel driver. Diameter: 115mm Width: 108mm 18 mm wheel square, with reinforcement ring
0 of 0 reviews
Leave a review!
Share your experiences with other customers.
Login
No reviews found. Share your insights with others.
Genuine HT spare/option part.Rim reinforcement, transfers the load over a larger diameter into the rim and protects the rim's square. Will also allow for the use of rims with an already damaged square.For FG Monster- and Stadium rims 6232, 6232/01, 6232/03, 6232/04, 6232/05 and 6232/06.14 mm wide square drives must be used.Please note:When installed with new (unused) rims, it may be necessary to modify the rim's square slightly.Contents:2 pieces
This video of the European Championships in Luxembourg in 2008, made by Chris Wright from the well known Rev-Up racing magazine is available on DVD and Bluray disc.On both formats you get the full week of action on the track with slow motion stuff at very close quarters, in-car-cam tour of the track, the main final, Concourse of the cars, Opening Ceremony of the Teams, Awards Ceremony. There are two bonus videos of the Warm-Up Race in Luxembourg in May and the EFRA Off-Road GP in the UK as well. For those taking the Blu Ray version, not only do you get all this in Full High Definition but you also get our trip behind the scenes of a South African Lion Farm we were at in May on a private visit this year on an appraisal of the venue for the Worlds in 2009.The Blu Ray version will be provided on a 50 gigabyte DVD. To make it as compatible with the hardware out there it has been done to Sony Firmware Version 2.0 so a PS3 60 gig and 40 gig will work just fine. If for some reason it does not then either by Ethernet cable or wireless connection, upgrade the operating system in the PS3.One last thing. When DVD's first came out in the nineties, blank media was very expensive. This is the same with Blu Ray. It has come down in price but needs to come down more. Sadly we have had to pay the going rate which is why the disc is a little expensive but well worth it to see the action inglorious High Definition at the maximum resolution of 1920 x 1080. Even Holloywood Studios only give you 24 frames per second (we do 25) and if you are lucky 25,000 bitrate but more than likely 18,000 (we give you 30,000 for higher resolution).
Genuine GRP spare/option part. GRP off-road disc rim for tires with approx, 132 mm inner diameter, 18 mm square wheel drive forFG & Co.The closed disc rim features reinforcement ribs on the backside and a protective collar around the wheel nut seat.Dimensions:for tires with an inner diameter of approx. 132 mm and approx. 70 mm widthand an outer diameter of approx. 180 mm (like i.e. GRP / Gandini tires)Weight approx. 172 grammsContents:2 pieces
This 1/6 scale 4WD Off-Road buggy has been strongly inspired by competition types. With its front and rear Leopard type suspensions, the Fun Cross allows the most extreme drives. Built on a 4mm aluminium chassis, closed belt drive, 2 differential gears, double wishbones at front and rear axle with many adjusting possibilities as well as large-volume oil-pressure shock absorbers for traction and optimal ground contact. The model is equipped with a powerful 26 cm³ combustion engine with tuning pipe and ready oiled air-filter. The engine runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The RTR version is delivered with assembled and preset 2.4 GHz radio control system and rechargeable batteries. To complete the non-RTR version are all popular servos and radio control systems are suitable. HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURDriveshaft bootsProtect ball drive as well as cardan drive against dirt. 4 pairs / 8 piecesValue: 42,90 EURAlloy spur gear carrierUse for 46T - 48 teeth spur gears.Value: 39,90 EURTotal value: 200,30 EUREquipment of the model:Powerful 26 cm³ engineTwo differentials4 mm thick chassisFour wheel independent suspensionsBig Bore dampersDimensions:Length: 700 mmWidth: 460 mmHeight: 310 mmWheelbase: 535 mmWeight: 10,4 kg
No matter where you will set this model into action - you will always be right in front with the FG Monster Pro The E stands for electric power, the 4 means fourwheel drive. Extremely fast, terrific torque and all this without any engine noise. The Monster Pro is equipped with a Brushless and a ESC. The model will be delivered with a clear body shell.You can select the car with complete RTR-equipment from the options menu. RTR equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Empfänger: Mini BECy1570 CYS S0650 Largescale servo, 40 kg/0,11 secTx-batterys 4 pieces y0660/04 Equipment: y1567 ZTW Beast Pro 200A ESC TT56112/700 Top Tuning Monster Brushless Motor 700 kV Suspension compression at the rear of the FG Monster Pr should be reduced to prevent the rear fenders from coming in touch with the tires. As an alternative you may cut the fenders instead.The control can be regulated simply via transmitter or optionally via a program card. For the final assembling you need LiPo batteries and the suitable charger. For an unproblematic mounting we recommend to use LiPo batteries with a max. length of 150mm and a width of 50mm. The model is delivered with the EC8 connector system.