Attention: This offer is valid from today until 31th 5.2012 24:00 PM only!
Or while supply lasts!
Or while supply lasts!
Smartech Uno 1/6 offroad buggy, 28cc engine, 2.4 GHz radio control
 |
SMT-UNO regular price: 529,--
Offer of the month price: 355,55 The successor to the legendary Carson Attack With 28 cc engine with 2.4 GHz radio control with fail-safe function with receiver battery with charger and charging cord! Factory painted Smartech UNO body shell with rear wing Chassis with complete four-point roll cage Due to the easy handling and the high usability of the 28 cc gas engine, the UNO is also suitable for beginners. The engine runs on fuel mixture (1:25) from the gas station. A full tank lasts for approximately 40 - 45 minutes driving time. The engine is started like a lawn mower: tank up - push the primer pump 2-3 times - pull the starter - go! A kill switch on the engine is used to turn it off.  |
Smartech Comanche 1/6, 28cc engine, 2.4 GHz radio
 |
Regular price: 549,--
Offer of the month price: 388,88 The legendary Carson Monster Truck With 28 cc engine with 2.4 GHz radio control with fail-safe function with 1800 mAh receiver battery with charger and charging cord! Factory painted Smartech Comanche body shell Chassis with complete six-point roll cage Due to the easy handling and the high usability of the 28 cc gas engine, this model is also suitable for beginners. The engine runs on fuel mixture (1:25) from the gas station. A full tank lasts for approximately 40 - 45 minutes driving time. The engine is started like a lawn mower: tank up - push the primer pump 2-3 times - pull the starter - go! A kill switch on the engine is used to turn it off. |
Smartech Thunderbolt 4x4 HT edition RTR with 28 cc PT Engine
 |
Regular price: 699,90
Offer of the month price 399,99 Offroad buggy with four wheel drive and complete rc-system included The latest addition to the successful Smartech Devil 4WD product line. With improved shocks and a-arms. The HT edition also includes front universal drive shafts and the tuning brake set with steel rotors. Technical data: - 4 mm aluminum chassis plate with countersunk bolts - 3 differentials - shaft drive - universal drive shafts at the front wheels - 6 mm shock stay - all gears made of steel - centermount independently adjustable for front and rear tuning disk brakes - adjustable servo saver - large oil filled shocks (22 mm diameter shock body, 6mm diameter piston rod) - Aluminum front uprights - turnbuckles for toe-in/out and camber adjustment - fully ballraced - 700cc fuel tank with filter and ventilation - splash protected box for receiver and rx-battery - side mounted rocker panels for protection against dirt and gravel - gear protector - tires mounted and glued on disk rims - painted body shell - 28 cm³ Smartech PT engine - length 760mm - width 470mm - wheelbase 520 mm - complete rc-system - User manual englisch / german |
Carson C5 1/5, PT 23 engine, painted body shell to choose with complete radio control
  |
Regular price: 649,90
Offer of the month price: 444,44 Top features:
Body color to choose:
The chassis is pre-installed. The FM rc-system with two servos, receiver and rx-battery pack is factory installed, a charger is also included. Easy handling and the high usability of a gas engine make this a perfect model even for beginners. It needs a fuel mixture (1:25) available at any gas station. One tank filling suffices for approx. 40-45 minutes driving fun. The engine is started like a lawn-mower. Just pour in the gas - push the fuel pump 2 to 3 times - pull at the pull starter - and ready you are!! There is an off/on switch on the engine to turn it off. Technical data: Length ca. 900 mm Width ca. 400 mm Wheelbase 535 mm 23 cm³ PT engine with pull-rope starter |
Carson C5 version RTR with rc-system and PT 23 engine, choice of body shells, long wheelbase 535 mm, width 400 mm
 |
Regular price: 749,90
Offer of the month price: 499,-- The chassis is pre-installed. The FM rc-system with two servos, receiver and rx-battery pack is factory installed, a charger is also included. Easy handling and the high usability of a gas engine make this a perfect model even for beginners. It needs a fuel mixture (1:25) available at any gas station. One tank filling suffices for approx. 40-45 minutes driving fun. The engine is started like a lawn-mower. Just pour in the gas - push the fuel pump 2 to 3 times - pull at the pull starter - and ready you are!! There is an off/on switch on the engine to turn it off. With unpainted body shell. Technical data length ca. 900 mm width ca. 400 mm wheelbase 535 mm 23 cm³ PT engine with pull-rope starter |
HPI Baja 5B SS Mammoth kit H10611
  |
Regular price: 1.149,--
Offer of the month price: 1.044,99 Special version with the super offroad tires combination V-Pin/Mammoth! The top race car from HPI. HPI is proud to announce the Baja SS, a full-option Baja kit that you assemble yourself, loaded with tons of hop-ups that enhance the speed and power of the Baja 5B buggy, improve its durability even further, and provide totally sweet custom looks! The Baja SS follows the HPI innovation of upgraded ?Super Sport? models that feature kit versions of popular HPI RTR models, with additional option parts added to enhance the enjoyment of your kit. A long list of option parts is included with the SS version of the Baja 5B. As you build the kit, you add in the options that come in the box, and add your own radio gear (receiver, throttle servo, and receiver battery). This car comes in kit form with an unpainted body shell, alloy parts are anodized in gun metal or orange. Except for the steering servo there are no rc components included! |
y0739 Your choice of painted 1/5 body shells
 |
Offer of the month: 188,88
The price for the material alone is more than 220.00 and whoever did a paintjob knows about the effort which goes into it, not to mention the additional application of the decals. This adds up to several hours of work and the result does not always please you! You can select from 8 different body shell/decals combinations! All body shells are for chassis with 530/535mm wheelbase and normal width, i.e. all current FG touring cars; Carson C5, HARM, RS5, etc. Note: Unfortunately, quantities in stock for each body shell at this exceptional price are limited. This is truly first come first served only! When theyre gone, theyre gone! Sorry, there is no possibility of re-ordering at this special price! |
y1080 Painted Ford Mustang body shell, yellow
 |
Regular price: 149,90
Offer of the month price: 49,90 Fits chassis with530/ 535 mm wheelbase, standard touring car width. Painted body shell with decals already applied for FG and other. Length x width x height: 890 x 392 x 220 mm. |
y0704 Smartech Monster Truck body shell, painted
 |
Regular price: 79,90
Offer of the month price: 49,90 Painted body shell with decals. Suitable for Carson Comanche, Carson Stadium Racer, Stadium Truck, Bigfoot Race and Pickup Truck, too. |
y0557 Zenoah G230/04
 |
FG shop price: 262,--
Offer of the month price: 199,99 The 23 cc Zenoah engine for large scale cars! Content of delivery: engine as shown with carb and pull starter. The engine will be delivered with pull starter, carb and spark plug / spark plug cap. |
Gas-nitrited tuning clutch bell for all cars to choose
 |
Regular price: 40,50
Offer of the month: 29,90 Different versions to choose: y0726 Gas-nitrited tuning clutch bell for Losi 5ive-T, 1 pce. y0723 Gas-nitrited tuning clutch bell for FG & Co., 1 pce. y0729 Gas-nitrited tuning clutch bell for HPI Baja models, 1 pce. |
GPM Big Scale adjustable 3 shoe clutch
 |
Regular price: 109,90
Offer of the month price: 69,90 To choose: y0730 GPM Big Scale-Cross adjustable 3 shoe clutch The Big Scale-Cross clutch is equipped with 1.2 mm springs. This version is particularly suitable for off-road use. y0731 GPM Big Scale-Race adjustable The Big Scale-Race clutch is equipped with 1.3 mm springs. This version is particularly suitable for on-road use. Adjustable 3-shoe clutch for: Zenoah / Chung Yang / Losi / HPI - Fuelie / Smartech PT and many other engines. The GPM-Big Scale clutch: Suitable for racing and for the ambitious hobbyist driver. Unlike the stock clutch, the installed GPM-Big Scale clutch can be adjusted by turning one single screw. |
y0975 Alloy spring retainer big or small to choose
  |
Regular price: 18,90
Offer of the month price: 9,90 Alloy spring retainer, large, y6092 - 2pcs. Alloy spring retainer, such as FG 6092. Fits all FG shocks with 20 mm body (OEM shocks on all FG buggy / monster / stadium models and tuning shocks 6481 / 6482) and many other 1/5 and 1/6 scale models. Retainer diameter: 25 mm Accepts springs with approx. 20 mm inner diameter Slot for 4 mm shock shaft y7092 Alloy spring retainer, small - 2pcs. Alloy spring retainer, such as FG 7092 or Carson 32556. Fits all FG shocks with 16 mm body and all Carson / Smartech 2WD and many other 1/5 and 1/6 scale models. Retainer diameter: 23 mm Accepts springs with approx. 16 mm inner diameter Slot for 4 mm shock shaft |
y0976 Alloy shock shaft end, long or short to choose
 |
Regular price: 18,90
Offer of the month: 9,90 y7087/01 Alloy shock shaft end short, 2pcs. Replaces FG 7087/01. Fits all FG shocks, Carson 2WD and many other 1/5 and 1/6 scale models. Replaceable bushings. Length: 22.5 mm overall, about 17 mm to to center of bushing M4 thread for shock shaft Bushing i.d. 4 mm y7087/02 Alloy shock shaft end long, 2pcs. Replaces FG 7087/02. Fits all FG shock, Carson 2WD and many other 1/5 and 1/6 scale models. Replaceable bushings. Length: 27 mm overall, about 22 mm to to center of bushing M4 thread for shock shaft Bushing i.d. 4 mm |
y1004 Driveshaft boots for ball drive + dogbones, 10 pcs.
 |
Regular price: 44,50
Offer of the month price: 19,99 The set includes 10 pcs. Protect ball drive as well as cardan drive against dirt. For FG and Carson ball drives, fits standard dogbones as well. |
y1147 Failsafe with kill switch and diagnostic LEDs best quality fits for all transmitters
 |
Regular price: 39,90
Offer of the month: 29,90 The best and safest failsafe modul at the time. This kill switch module works with new FM and 2.4 GHz rc-systems. You must have a free channel on your rc-system in order to install the module! This means at least a 3-channel radio for standard 1-servo brake/throttle setups or a 4-channel radio for dual brake servos driven by the radio's mixer function. The module is smaller than a sugar cube! |
y0737 Electronic 20 Amp Bigscale switch
 |
Regular price: 39,90
Offer of the month price: 29,90 The 20-amp Bigscale switch was specifically designed as a receiver switch for 1/5 and 1/6 cars applications. Note: the electronic switch 20 amp Bigscale delivers the batterys full voltage to the connected receiver. When using 7.4V LiPo batteries receiver and servos must be suitable for this voltage! Using the latest MOSFET technology allows the20 amp Bigscale switch to handle extreme loads, despite its small size. You can even use four very powerful servos which are common in large scale cars without any problems! A blue LED status light clearly displays the activated mode. The 20 amp Bigscale switch is dust-and splash protected. He has an extremely low internal resistance and very low power consumption in off mode. Nevertheless it is recommended to unplug the battery when the model will not be used for an extended period. |
CYS S8203 Digital Power-Servo, metal gears
 |
Regular price: 59,90
Offer of the month price: 33,33 New ballraced digital servo with metal gears. Powerfull servo for steering applications in 1/5 and 1/6 scale cars, can be used for throttle/brake as well.
|
Samba 7 Racing - tuned pipe system DMC 50-1101
 |
Regular price: 229,--
Offer of the month price: 199,-- Samba 7 Racing - tuned pipe system DMC 50-1101, set New: Samba 7 Racing - tuned pipe system DMC 50-1101 The successful tuned pipe system at German, European and World Championship! All(!) 10 drivers of the World Championship 2011 final used the Samba 7! "This new tuned pipe system is the result of the development of the Samba 6 tuned pipe! We have tested and optimized the Samba 7 - tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks! The Samba 7 has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springs, making a failure prone o-ring seal obsolete! |
Jetpro Tuning pipes, different versions to choose
 |
Regular price: 169,90
Offer of the month price: 119,90 Jetpro Tuning pipes, different versions to choose, 1 pce. JP Power-Exhaust-Systems provide an extremly increased power. They feature an integrated silencer. On the Monster Beetle the body shell must be cut slightly. The exhaust system is complete chromed. |
5105 Tuned pipe system Mielke Twin-Power for HPI Baja cars
 |
Regular price: 189,90
Offer of the month price: 169,90 Tuned pipe system Mielke Twin-Power for HPI Baja cars. The top pipe system for all HPI Baja cars 5B SS, 2.0, 5sc, 5T and so on! Twin-Power By the Tuned Pipe-Pope M. Mielke The Twin-Power system, does not only look fantastic, but also guarantees an optimum performance from 23ccm up to 30ccm! The double spring-backed, flexible connection guarantees a secure hold, even with leaps and somersaults. The Twin-Power pipe is completely integrated in the original Baja roll bar. The Twin-Power pipe is available in orange and black color. The manifold is always black, due to the high temperatures in the immediate area of the exhaust outlet. |
bj038 GPM - Aluminum gear protector with window for HPI
 |
Regular price: 49,90
Offer of the month: 33,33 Item N° bj038 Aluminum gear protector with window for HPI, 1 pce. GPM aluminum gear cover with window, fits all 1/5 and 1/6 HPI cars. Contrary to the stock cover the GPM aluminum cover allows for checking the gears without removal. |
bj903r GPM HPI aluminum rear bumper
 |
Regular price: 49,90
Offer of the month price: 33,33 Item N° bj903r GPM HPI aluminum rear bumper, 1 pce. GPM aluminum rear bumper for HPI 1/5 and 1/6 cars - the ultimate collision protection! Who ever rear-ends into this bumper gets a "bloody nose".  The rear bumper not only protects your rear suspension, but above all, your tuned pipe system! |
y0725 Mad Max Rim set, yellow for LOSI and HPI cars, 2 pairs / 4 pcs.
 |
Regular price: 49,90
Offer of the month price: 29,90 Accepts all genuine HPI tires and foam inserts. Very strong with 24 mm hex drive and reinforcement ring. The set fits LOSI 5ive-T cars. and all vehicles HPI 1/5 scale. Set includes: - 1 pair of front wheels - 1 pair of rear wheels - 2 pairs of inner bead lock rings - 2 pairs of outer bead lock rings - screws for bead lock rings |
Mecatech Crossbaja 2010, hydraulic brake for HPI Baja
 |
Regular price: 299,90
Offer of the month price: 222,22 Hydraulic premium brake system to fit the front wheels of all cars from the HPI Baja line. Very high quality cnc-machined parts, direkt bolt-on using only existing mounting points. Huge 15 mm brake pistons and 69 mm rotors provide reliable stopping power. |
Mecatech hydraulic brake Crosshydro for FG/Carson / Smartech 1/6 2WD/4WD offroad and monster models
 |
Regular price: 199,90
Offer of the month price: 139,90 Full-metal hydraulic brake for the layshaft. Fits Carson / Smartech 1/6 offroad / monster and stadium cars, 2WD cars only! : - Carson Attack, Super Attack, Attack Evo - Carson Comanche - Carson CRT + CPT 2WD - Carson Gas Blaster - Carson Race Touareg - Smartech UNO + Monster Truck - FG Onroad-, Offroad-, Monster and Stadiummodels (2WD and 4WD!) The uncompromising hydraulic brake, ideal for offroad + monster / stadium cars. Since caliper and brake disk of the Mecatech Crosshydro are positioned on the intermediate shaft instead of inside the wheels, they are protected by the body shell which makes this brake system especially suitable for road use. |
y0137 Supergrip C6 wheels on rims for FG, Carson and other, 2 pairs
 |
Regular price: 69,90
Offer of the month price: 49,90 Offroad tires mounted and glued on rims, Durchmesser x Breite / diameter x width 150 x 60 mm, 18 mm wheel square. Your choice of white or chrome rims |
Mammoth offroad tires extra wide, mounted and glued on original FG 1:6 rim
 |
Regular price: 99,90
Offer of the month price for 1 pair: 49,90 Extra wide tire mounted and glued on genuine 1/6 scale FG buggy rims 6105/01 with extension ring! Diameter 165 mm, width 80 mm. Fits all FG and Carson largescale cars, may fit other cars with 18 mm wheel squares as well. HPI Baja 5 cars can also use these tires when equipped with special adapters. Unit price: - Mammoth tires extra wide: 47.20 / pair - Mammoth inserts extra wide: 9.90 / pair - genuine FG wide track rims 6105/01: 14.90 / pair - genuine FG rim extension rings 6436: 14.90 / pair - mounting + glueing rims / extensions / inserts / tires: 13.00 Total: 99.90 Priced per pair. We have tried various rubber / tire compounds for several months on various forms of terrain, etc.. |
y0362 Monster wheels GD type, 2 pairs/4 pcs
 |
Regular price for 4 pcs.: 109,80
Offer of the month price: 59,90 Complete set of four monster tires, tire inserts and rims, mounted and glued. Suitable for FG Marder and Baja Buggy, Carson 1/6 scale cars without modifications. |
y0580 Mammoth Supergrip for 1/6 and 1/5 offroad cars glued, 2 pairs / 4 pcs.
  |
Regular price: 169,90
Offer of the month price: 99,99 Mammoth Supergrip for 1/6 and 1/5 offroad cars Parking lot / race tires for your offroad car. Glued on genuine FG rims (rear tires using extension rings), with foam rubber inserts included. Rim has 18 mm square drive with reinforcement ring. |
y0067 HT tire cement + activator
 |
Unit price: 12,80
Offer of the month price: 8,90 Set of * special tire cement ht 4000 * spray can activator Accelerator-spray is the second component to cure superglue immediately. Advantages: - Tangible adhesion after a few seconds - Aromatic solvents and hexane free - Suitable for hobby, craft, industry and household. Processing: Clean the surface thoroughly. Apply accelerator at room temperature on both surfaces to be bonded until a clear liquid film appears. Air out the applied accelerator, then apply the superglue as usual. |
HT alloy front axles for FG, Carson and other
 |
Regular price: 283,00
Offer of the month price: 129,90 HT alloy front axles for FG, Carson and other, set. Available for following cars: - y0906 FG Monster / Stadium 2WD - y1033 FG Marder, Beetle, Pajero and Monster Beetle - y1034 FG Baja Buggy 2WD - y1047 Smartech UNO, C5 / R5, Attack, Super Attack, GasBlaster and Touareg - y1048 FG Sportsline 08, Sportsline 04, Sportsline and Eco-Line - y1204 Smartech Monster Truck / MT, Carson 1:6 Comanche, Attack Evo, CRT + CPT The sets include complete front bulkheads A + B with brace, upper (adjustable) and lower a-arms and shock tower. |
HT Aluminum rear suspension kit for 1/6 + 1/5 scale 2WD models from FG, Carson, Smartech and other
 |
Unit prices until 259,70
Offer of the month price: up 149,90 y0990 for all FG 1/6 scale 2WD Offroad, Baja, Marder, Monster, Stadium -Truck models and for 1/6 scale Sportsline Race Truck. y0991 for all FG 1/5 scale Sportsline 2WD touring cars, GT models (except Formular 1 and 1/6 scale Race Truck) y1003 for all 1/6 scale Smartech Uno, Carson Attack, Super Attack, Gas Blaster and 1/5 scale Smartech/Carson touring car C5 and R5 models. y1205 For Smartech 2WD Monster Truck, Carson Comanche, Attack Evo, CRT and CPT. |
y0897 Wheelie bar with suspension for 2WD + 4WD models
 |
Regular price: 92,80
Offer of the month price: 59,90 Wheelie bar with double ball raced wheel, cnc-machined from high strength alloy. The arm has a rubber suspension unit, the height is infinitely adjustable. The suspension allows for a maximum deflection of 30 degrees and is dirt- and mud-proof. The wheel bearings are sealed. Installation on other models will be possible, but requires modifications to the chassis, mainly to accept the bolt pattern. The Carson Attack already has the correct pattern. |
y0736 Microtorch gas torch
 |
Regular price: 19,90
Offer of the month price: 9,90 Budget priced gas torch with piezo ignition for use with lighter gas (Number y1008 CFH gas for pocket torches). When wrenching on a rc-car a pocket torch is an essential tool for removing screws which have been installed using thread locking compound. The torch - featuring a safety stand for hands-free operation - allows a punctual heating of the screw or nut without damaging the surrounding materials. |
y0695 HT Tool bag
 |
Regular price: 19,90
Offer of the month price: 12,90 Tool bag, extremely rugged tool bag made from reinforced fabric, sewn edge. With 41 flexible attachment loops for various tools with all-round zipper and reinforced handle. Tools and decorative items are for presentation purpose only and not included. Width: 510 mm Height: 275 mm |
y0715 rc-car-online High tech mechanics gloves, nitrile, black, 3 pair/ 6 pcs
 |
Regular price: 14,70
Offer of the month price: 9,99 With non-slip surface perfect for delicate work, actually improving dexterity and grip. Available sizes: 8, 9 and 10 glove size? Measure the circumference of your hand without the thumb and at the widest point (above the ankle). The tape measure should embrace the hand loosely. - Size 8 = 21 cm (S - L ) circumference - Size 9 = 24 cm (L - XL ) circumference - Size 10 = 27 cm (XL - XXL) circumference Norm EN388 Lining 100% polyamide Package contents: 3 pair / 6 pieces - partially coated with hightech nitrile - fits like a second skin - grips even when wet - good touch sensitivity - liquid-repellent - good resistance against oil and grease |
y0550 HT Car Bag for 1/5 scale cars (Fits FG, HPI, Carson a.s.o.)
 |
Regular price: 49,90
Offer of the month price: 29,90 Hobbythek car bag for 1/5 cars Fits for all 1/5 models for example: FG-: HPI-; Carson-; Smartech-; Conrads-; Harm-; RS5-; Lauterbacher a.s.o Made from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure. No dirt in the car boot! Dimensions: Length: 95 cm Width: 50 cm Height: 30 cm |
y0551 HT Car Bag for 1/6 scale cars (Fits FG, Carson a.s.o.)
 |
Regular price: 49,90
Offer of the month price: 29,90 Hobbythek car bag for 1/6 cars. Fits for all 1/6 models for example: FG Offroad-; Monster/Stadium-; Racetruck-; Carson-; Smartech-; Reely Carbon Fighter and any more models. Made from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure. No dirt in the car boot! Dimensions: Length: 70 cm Width: 50 cm Height: 40 cm |
y0558 HT Car Bag XXL for LOSI 5ive-T and many more
 |
Regular price: 59,90
Offer of the month price: 39,90 Hobbythek car bag for Losi 5ive-T cars. The XXL version is especially made for the Losi 5ive-T. Of course, other 1/5 and 1/6 large scale cars will fit into this bag as well; however, in this case the XXL bag gives you plenty of room for additional accessories. Made from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure. No dirt in the car boot! Dimensions: Length: 100 cm Width: 57 cm Height: 39 cm |
y0552 HT Car Cover for all cars, 1/5 and 1/6
 |
Regular price: 19,90
Offer of the month price: 11,90 Hobbythek Car Cover Fits all 1/5 and 1/6 scale cars. Made from durable fabric, easily washable, with circumferential elastic band. |
y0518 Service bag
 |
Regular price: 4,90
Offer of the month price: 3,90 Special fabric bag to protect engines, rc-plates or other expensive items. Large opening and pull-string closure. Size: Diameter 200 mm Height 200 mm |
y0615 HT Yellow safety vests for driver and helper
 |
Regular price: 9,90
Offer of the month price: 4,90 Sponsored volume price for clubs: 29.90 / pack of ten High visibility bright yellow safety vests for drivers and assistants, highly recommended for racing and training tracks. It should be kept in mind that large scale 1/5 or 1/6 cars weigh more than 10 kg and can be very fast! On most tracks off safety vests are required specifically for volunteers. |
